Le test Network General 1T6-220 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Network General 1T6-220. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Network General 1T6-220, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Si vous vous inscriez le test Network General 1T6-220, vous devez choisir une bonne Q&A. Le test Network General 1T6-220 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Network General 1T6-220 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Network General 1T6-220.
Code d'Examen: 1T6-220
Nom d'Examen: Network General (Switched Ethernet Network Analysis and Troubleshooting)
Questions et réponses: 143 Q&As
1T6-220 Démo gratuit à télécharger: http://www.pass4test.fr/1T6-220.html
NO.1 Port mirroring can be set from the Sniffer Portable only if the switch supports it and the switch is
configurable via ______.
A.IOS
B.SPAN
C.SNMP requests
D.802.1
Answer:C
Network General certification 1T6-220 1T6-220 examen certification 1T6-220 1T6-220 examen
NO.2 The Sniffer History Samples reports are especially useful for long term reporting of __________.
A.Slow response time problems
B.Identifying high rates of collisions and CRC errors
C.Combining multiple criteria for baseline reporting
D.All of the above
Answer:D
Network General certification 1T6-220 1T6-220 1T6-220
NO.3 The _______ always has an Ethertype of 8808.
A.PAUSE MAC frame
B.Buffer MAC frame
C.JAM-PAUSE frame
D.STOP MAC frame
Answer:A
Network General examen 1T6-220 1T6-220 1T6-220
NO.4 _____ needs to be configured on the switch port you are monitoring or all Detail tab fields will return NA.
A.SNMP
B.RMON
C.MIB
D.802.11b
Answer:B
Network General certification 1T6-220 1T6-220 1T6-220
NO.5 Consider the following description: Only part of a frame has arrived at the adapter when the first part
begins transmission on the media. The adapter quits sending the frame, leaving an incomplete frame
transmitted. This is likely a(n):
A.IRQ setting problem
B.Normal occurrence with any Ethernet adapter
C.TCP timer problem
D.Fast Transmit Adapter issue
Answer:D
Network General certification 1T6-220 1T6-220 examen 1T6-220
NO.6 A duplex mismatch between a switch port and an end node will typically result in ____________.
A.Total loss of communications
B.Fall back to half-duplex mode
C.Increased broadcast traffic
D.Excessive collisions
Answer:D
Network General certification 1T6-220 certification 1T6-220
NO.7 When a network is displaying excessive propagation delay problems, the corruption in the frame is
random, but typically seen before the _______.
A.64th bit
B.64th byte
C.32nd bit
D.32nd byte
Answer:B
certification Network General 1T6-220 1T6-220 1T6-220 1T6-220
NO.8 The Gigabit Ethernet Sniffer user interface uses the standard Sniffer interface with enhancements for
Gigabit.
A.True
B.False
Answer:A
certification Network General 1T6-220 1T6-220
NO.9 CSMA/CD stands for:
A.Collision Sense, Multiple Access, Carrier Detection
B.Carrier Sense, Multiple Access, Collision Detection
C.Carrier Sense, Multiplexed Access, Collision Detection
D.Collision Sense, Multiple Access, Collision Detection
Answer:B
Network General certification 1T6-220 1T6-220 certification 1T6-220
NO.10 Ethernet frames that do not end on an 8 bit boundary:
A.Are jabbers
B.Are runt frames
C.Have CRC errors
D.Have alignment errors
Answer:D
Network General examen 1T6-220 1T6-220 1T6-220
NO.11 Collisions are always eliminated in __________ environments.
A.Switched Ethernet
B.Full Duplex
C.Gigabit Ethernet
D.All of the above
Answer:B
Network General 1T6-220 1T6-220 examen
NO.12 When receiving an incoming frame, a station in either half-duplex or full-duplex mode will __________.
A.Check for the maximum frame size of 64 bytes
B.Perform collision detection
C.Truncate the frame after 1518 bytes
D.Validate the FCS
Answer:D
Network General 1T6-220 certification 1T6-220 1T6-220 certification 1T6-220
NO.13 Choose all that apply. Which of the following functions are performed in a Full-duplex Ethernet
environment?
A.Carrier sense before transmitting
B.Maintain an inter-frame gap between frames
C.Perform CRC calculation on transmitted frame
D.Back off and retransmit when a collision occurs
Answer:B C
Network General examen 1T6-220 examen 1T6-220 1T6-220
NO.14 Because Gigabit Ethernet can generate up to 125 Mbytes of data per second at full capacity it is
important to __________ when starting to analyze a network problem.
A.Capture data for one minute and then analyze the Expert symptoms
B.Apply a capture filter for a specific station or conversation
C.Capture data directly to disk
D.Increase the Expert thresholds before capturing data
Answer:B
certification Network General 1T6-220 certification 1T6-220 1T6-220
NO.15 The maximum cable distances for Full Duplex Ethernet are ________ compared to Half Duplex
Ethernet:
A.Much higher
B.The same
C.Much lower
D.Slightly higher
Answer:A
Network General examen 1T6-220 1T6-220
NO.16 When a network is displaying _______ problems, the frames are the right size, but have incorrect data
with CRC errors. The Sniffer will show Physical Errors as symptoms or diagnoses.
A.Excessive propagation delay
B.Legal collision
C.Signal reflection
D.Electrical noise
Answer:D
Network General 1T6-220 examen 1T6-220
NO.17 Legal collisions in Ethernet occur within the first _____ of data.
A.32 bits
B.64 bits
C.256 bits
D.512 bits
Answer:D
Network General examen certification 1T6-220 1T6-220 certification 1T6-220
NO.18 The Sniffer may identify frames affected by a rogue node or bad port as __________.
A.CRC errors
B.Oversize frames
C.Undersize frames
D.Late collisions
Answer:D
Network General examen 1T6-220 1T6-220 1T6-220
NO.19 The IEEE 802.3x specification describes the operation of:
A.Fast Ethernet
B.Switched Ethernet
C.Gigabit Ethernet
D.Full Duplex Ethernet
Answer:D
certification Network General 1T6-220 1T6-220 examen 1T6-220 certification 1T6-220
NO.20 Choose all that apply. The Gigabit Ethernet Sniffer can be configured to store data in the __________
buffer during capture.
A.Adapter Buffer
B.Capture Buffer
C.Jitter Buffer
D.All of the above
Answer:A B
certification Network General 1T6-220 examen 1T6-220 examen 1T6-220 examen
C'est pas facile à passer le test Certification Network General 1T6-220, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Network General 1T6-220 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Network General 1T6-220, vous allez passer le test Network General 1T6-220 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
没有评论:
发表评论