Pass4Test est un bon site d'offrir la facilité aux candidats de test IBM 000-734. Selon les anciens test, l'outil de formation IBM 000-734 est bien proche de test réel.
Le Certificat de IBM 000-734 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat IBM 000-734, c'est-à-dire avoir une grande fortune. Le Certificat IBM 000-734 peut bien tester des connaissances professionnelles IT. La Q&A IBM 000-734 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test IBM 000-734, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test IBM 000-734 coûtant un peu d'argent.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification IBM 000-734. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Selon les anciens test IBM 000-734, la Q&A offerte par Pass4Test est bien liée avec le test réel.
Beaucoup de gens trouvent difficile à passer le test IBM 000-734, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test IBM 000-734 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Code d'Examen: 000-734
Nom d'Examen: IBM (DB2 9 Advanced DB Administrator for Linux,UNIX,and Windows)
Questions et réponses: 102 Q&As
On doit faire un bon choix pour passer le test IBM 000-734. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM 000-734 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
000-734 Démo gratuit à télécharger: http://www.pass4test.fr/000-734.html
NO.1 Given a SHEAPTHRES value of 2560, in which two cases will a SHEAPTHRES_SHR value of 1024
be meaningful? (Choose two.)
A. INTRA_PARALLEL NO
B. MAX_CONNECTIONS 2000, MAX_COORDAGENTS 100
C. MAX_AGENTS 100, MAX_CONNECTIONS 2000
D. MAX_CONNECTIONS 500, MAX_COORDAGENTS 1000
E. INTRA_PARALLEL YES
Answer: BE
certification IBM certification 000-734 000-734 000-734
NO.2 What would indicate intra-partition parallelism in an Optimizer Plan?
A. BTQ
B. LTQ
C. IP
D. DTQ
Answer: B
IBM examen 000-734 examen 000-734 examen 000-734
NO.3 Which data organization schemes are supported?
A. PARTITION BY HASH and ORGANIZE BY
B. PARTITION BY RANGE and ORGANIZE BY KEY SEQUENCE
C. PARTITION BY HASH and ORGANIZE BY KEY SEQUENCE
D. PARTITION BY RANGE and ORGANIZE BY
Answer: D
certification IBM 000-734 examen 000-734
NO.4 A database administrator needs to create a table with key columns C1 (i.e. YearDay), C2, and C3. This
table needs tobe partitioned by column C1 with three months per data partition. Additionally, data needs
to be organized by columns C2 and C3, so that all rows within any three month date range are clustered
together based on 12 months of data. Which CREATE TABLE statement will accomplish this objective?
A. CREATE TABLE tab1 (c1 INT,c2 CHAR(2), c3 INT,c4 CHAR(2))PARTITION BY RANGE (c2)
(STARTING 200601 ENDING 200612 EVERY 3)ORGANIZE BY DIMENSIONS (c2, c3))
B. CREATE TABLE tab1 (c1 INT,c2 CHAR(2), c3 INT,c4 CHAR(2))PARTITION BY RANGE (c1)
(STARTING 200601 ENDING 200612 EVERY 3)ORGANIZE BY DIMENSIONS (c2, c3))
C. CREATE TABLE tab1 (c1 INT,c2 CHAR(2), c3 INT,c4 CHAR(2))PARTITION BY RANGE (c1)
(STARTING 200601 ENDING 200612 EVERY 3)ORGANIZE BY DIMENSIONS (c2))
D. CREATE TABLE tab1 (c1 INT,c2 CHAR(2), c3 INT,c4 CHAR(2))PARTITION BY RANGE (c1)
(STARTING 200601 ENDING 200612 EVERY 3)ORGANIZE BY DIMENSIONS (c3))
Answer: B
IBM 000-734 certification 000-734
NO.5 A batch application executes a large number of update statements. The service level agreement for
the application states that the application must complete its work as quickly as possible to ensure that
dependent workloads can start ontime. What is one way to help the application complete quickly?
A. Code the application to issue a LOCK TABLE statement.
B. Code the application to issue a LOCK ROW statement.
C. Decrease the number of I/O servers.
D. Increase the locklist parameter.
Answer:A
IBM 000-734 certification 000-734 000-734 certification 000-734
NO.6 Which statement is true about clustering indexes in a DPF environment?
A. The partitioning key columns should be added to all indexes with the INCLUDE option.
B. It is not possible to have a clustering index in a DPF environment.
C. The index columns should be prefixed by the partitioning key columns.
D. The partitioning key columns should be added immediately after the column in the index with the
highest cardinality.
Answer: C
IBM 000-734 000-734
NO.7 In which two environments would intra-partition parallelism be used? (Choose two.)
A. Single database partition, single processor
B. Single database partition, multiple processors
C. Multiple database partitions, single processor
D. Multiple database partitions, multiple processors
Answer: BD
IBM 000-734 000-734 examen 000-734 examen 000-734 examen 000-734 examen
NO.8 A database administrator wants to design a multi-partition database that can take advantage of both
intra-partition parallelism and inter-partition parallelism. Which configuration will allow the use of these
types of parallelism while using the least number of hardware components (servers, processors)?
A. one server having at least two processors
B. two servers having one processor and one logical database partition
C. one server having four processors and two logical database partitions
D. two servers each having four processors and two logical database partitions
Answer: C
IBM 000-734 000-734 000-734 000-734
NO.9 If the sort heap threshold parameter SHEAPTHRES_SHR is set to a value of 0, what will happen?
A. All sorts will be done in a temporary table space.
B. The shared sort memory allocation will be calculated by DB2.
C. No shared memory is allocated for sorting.
D. All sorts will be done in shared memory.
Answer: D
IBM examen 000-734 examen 000-734 000-734 examen
NO.10 When is the connection concentrator enabled?
A. When the value of MAX_CONNECTIONS is greater than the value of MAX_COORDAGENTS.
B. When the value of MAX_AGENTS is greater than the value of MAX_CLIENTS.
C. When the value of NUM_AGENTS is greater than the value of MAX_AGENTS.
D. When the value of NUM_CONNECTIONS is greater than the value of NUM_COORDAGENTS.
Answer:A
IBM 000-734 examen 000-734
NO.11 Table TAB1 was created using the following statement: CREATE TABLE tab1 (c1 INT, c2 INT, c3 INT,
c4 INT, c5 INT); If column C1 is unique and queries typically access columns C1, C2 and C3 together,
which statement(s) will createindex(es) that will provide optimal query performance?
A. CREATE UNIQUE INDEX xtab1 ON tab1 (c1); CREATE INDEX xtab2 ON tab1 (c2) INCLUDE (c3);
B. CREATE UNIQUE INDEX xtab1 ON tab1 (c1) INCLUDE (c2, c3);
C. CREATE UNIQUE INDEX xtab1 ON tab1 (c3, c2, c1);
D. CREATE UNIQUE INDEX xtab1 ON tab1 (c2) INCLUDE (c1, c3);
Answer: B
IBM examen 000-734 certification 000-734
NO.12 Which registry variable should be set to keep the buffer pools in memory on AIX and Linux?
A. DB2_KEEP_BP
B. DB2_PINNED_BP
C. DB2MEMDISCLAIM
D. DB2MEMMAXFREE
Answer: B
IBM 000-734 000-734 examen
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.13 A database administrator needs to update a table named TRANSACT by removing February 2005 data
and replacing it with February 2007 data. What are the proper steps, in the correct order, required to
accomplish this?
A. 1) ALTER TABLE transact DETACH PARTITION feb05 INTO newtable 2) LOAD FROM transact.del
OF DEL REPLACE INTO newtable 3) ALTER TABLE transact ATTACH PARTITION feb07 STARTING
'02/01/2007' ENDING '02/28/2007' FROM new table 4) SET INTEGRITY FOR transact
B. 1) ALTER TABLE transact DETACH PARTITION feb05 INTO newtable 2) LOAD FROM transact.del
OF DEL REPLACE INTO newtable 3) ALTER TABLE transact ATTACH PARTITION feb07 STARTING
'01/01/2007' ENDING '02/28/2007' FROM new table 4) SET INTEGRITY FOR transact
C. 1) ALTER TABLE transact DETACH PARTITION feb05 INTO newtable 2) LOAD FROM transact.del
OF DEL REPLACE INTO newtable 3) ALTER TABLE transact ATTACH PARTITION feb07 STARTING
'02/01/2007' ENDING '02/28/2007' FROM new table 4) RUNSTATS ON TABLE transact
D. 1) ALTER TABLE transact DETACH PARTITION feb05 INTO newtable 2) LOAD FROM transact.del
OF DEL REPLACE INTO newtable 3) ALTER TABLE transact ATTACH PARTITION feb07 STARTING
'02/01/2007' ENDING '02/28/2007' FROM new table 4) REORG TABLE transact
Answer:A
certification IBM certification 000-734 000-734 examen 000-734
NO.14 Which server houses the database partitions in the AIX BCU V2.1?
A. IBM System p5 570
B. IBM System p5 575
C. IBM System p5 590
D. IBM System p5 595
Answer: B
IBM 000-734 certification 000-734 000-734 examen 000-734
NO.15 Which action(s) will cause a compression dictionary to be removed from a table?
A. Set the table COMPRESS attribute to NO.
B. Set the table COMPRESS attribute to NO; run REORG against the table.
C. Set the table COMPRESS attribute to NO; run INSPECTRESETDICTIONARY against the table.
D. Set the table COMPRESS attribute to NO; run RUNSTATS against the table.
Answer: B
certification IBM certification 000-734 000-734 000-734 000-734 000-734
NO.16 If the ADD DBPARTITIONNUM command is used to add a new database partition to an existing DB2
instance,which statement is correct?
A. All existing databases in the instance are expanded to the new database partition but data cannot be
stored on the newpartition until it has been added to a partition group.
B. Database partition groups within existing databases will automatically include the new database
partition and willredistribute their existing data to the new partition.
C. Any single partition databases within the instance will automatically become multi-partition databases
once the newpartition is added to the instance.
D. A database administrator would need to modify the db2nodes.cfg file to complete the addition of the
new partition tothe instance.
Answer:A
IBM 000-734 certification 000-734 certification 000-734
NO.17 When a database administrator chooses the dimensions for an MDC table, which two characteristics
should beconsidered? (Choose two.)
A. the query transaction rate
B. numeric data versus character data
C. extent size
D. the cardinality of the candidate columns
E. prefetch size
Answer: CD
IBM 000-734 examen 000-734 000-734 000-734
NO.18 Table TAB1 was created using the following statement: CREATE TABLE tab1 (c1 INT, c2 INT, c3 INT,
c4 INT, c5 INT); If column C1 is unique and queries typically access columns C1 and C2 together, which
statement(s) will create index(es) that will provide optimal query performance?
A. CREATE UNIQUE INDEX xtab1 ON tab1 (c1) include (c2);
B. CREATE UNIQUE INDEX xtab1 ON tab1 (c1);
CREATE INDEX xtab2 ON tab1 (c3) INCLUDE (c2);
C. CREATE UNIQUE INDEX xtab1 ON tab1 (c2, c1);
D. CREATE UNIQUE INDEX xtab1 ON tab1 (c2) INCLUDE (c1);
Answer:A
IBM examen certification 000-734 000-734 000-734
NO.19 Which procedure will successfully configure the memory areas within a database, including buffer
pools, to use the Self Tuning Memory Manager (STMM)?
A. 1) Set the SELF_TUNING_MEM database configuration parameter to ON.2) Set the relevant
configuration parameters within the database configuration file to AUTOMATIC. 3) Use the ALTER
BUFFERPOOL command to change the size of all buffer pools to AUTOMATIC.
B. 1) Set the SELF_TUNING_MEM database configuration parameter to ON.2) Use the ALTER
BUFFERPOOL command to change the size of all buffer pools to AUTOMATIC.
C. 1) Set the SELF_TUNING_MEM database configuration parameter to ON.
Answer:A
IBM certification 000-734 000-734 examen
NO.20 A database administrator would like to examine repartitioning options for a partitioned database named
PRODDB. A workload has been captured on the system (Windows) and is stored in a file named
WORKLOAD.SQL. What is the proper command to run the Design Advisor so that it will evaluate the
information stored in the file and give advice on re-partitioning?
A. db2advis -d proddb -i workload.sql -P
B. db2advis -d proddb -i workload.sql -partitioning
C. db2advis -d proddb -i workload.sql -m P
D. db2advis -d proddb -i workload.sql -m ALL
Answer: C
IBM 000-734 000-734 000-734 examen 000-734 examen
Choisir le Pass4Test vous permet non seulement à réussir le test IBM 000-734, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A IBM 000-734 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
没有评论:
发表评论