Microsoft 70-341 examen pratique questions et réponses

Le test Microsoft 70-341 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Microsoft 70-341. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Microsoft 70-341 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Microsoft 70-341 à la première fois.

On doit faire un bon choix pour passer le test Microsoft 70-341. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft 70-341 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Pour réussir le test Microsoft 70-341 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-341. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-341 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Code d'Examen: 70-341
Nom d'Examen: Microsoft (Core Solutions of Microsoft Exchange Server 2013)
Questions et réponses: 111 Q&As

Pass4Test possède un l'outil de formation particulier à propos de test Microsoft 70-341. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Microsoft 70-341 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

70-341 Démo gratuit à télécharger: http://www.pass4test.fr/70-341.html

NO.1 You are evaluating the planned deployment of the additional Exchange Server 2013 servers.
You need to recommend changes to the DNS records to ensure that email messages are routed to
the Detroit site if the servers in the New York site are unavailable.
What should you recommend adding?
A. An MX record that has a preference value of 10 that points to EX4
B. An MX record that has a preference value of 20 that points to EX4
C. An MX record that has a preference value of 10 that points to EX3
D. An MX record that has a preference value of 20 that points to EX3
Answer: B

Microsoft   70-341 examen   certification 70-341   certification 70-341

NO.2 Your company has four regional offices and 20 branch offices. The regional offices connect to
each other by using a 30-Mbps WAN link. Each branch office connects to its nearest regional office
by using a 1-Mbps WAN link.
The network contains an Active Directory forest. The forest contains a domain controller in each
office. Each office maps to an Active Directory site. Each branch office site connects to the nearest
regional office site by using an Active Directory site link.
You have an Exchange Server 2013 organization that contains one server in each office. You need to
implement a messaging solution to meet the following requirements:
-The users in the branch offices must only be able to send email messages that are up to 2 MB to
the users in the other offices.
-The users in the regional offices must be prevented from sending email messages that are larger
than 5 MB to the users in any of the regional offices.
Which cmdlet should you run?
A. Set-TransportRule
B. Set-ADSite
C. Set-AdSiteLink
D. Set-RoutingGroupConnector
Answer: C

Microsoft examen   70-341 examen   70-341   70-341   certification 70-341

NO.3 You have an Exchange Server 2013 organization that is configured to filter email messages for
spam and malware.
You need to modify the schedule for applying updates to the anti-spam and the antimalware
definitions.
Which command should you run?
A. Update-MalwareFilteringServer.ps1
B. Set-MalwareFilteringServer
C. Set-SenderFilterConfig
D. Update-SafeList
Answer: B

certification Microsoft   certification 70-341   certification 70-341   70-341 examen

NO.4 You have an Exchange Server 2013 organization.
Your company has a Service Level Agreement (SLA) stating that you must be able to reconnect
disconnected mailboxes to user accounts for up to 365 days. After 365 days, disconnected mailboxes
must be deleted permanently.
You need to recommend a solution to meet the SLA. What should you include in the
recommendation?
A. Create a retention policy and apply the policy to all mailboxes.
B. Configure the deleted mailbox retention setting for all databases.
C. Configure the deleted item retention setting for all databases.
D. Implement a database availability group (DAG) that contains a lagged copy.
Answer: B

Microsoft   70-341   certification 70-341   certification 70-341   certification 70-341
11. Your company named Contoso, Ltd., has an Exchange Server 2013 organization named
contoso.com.
The network contains an Active Directory domain. The domain contains an organizational unit (OU)
named SalesOU. SalesOU contains two users named User1 and User2.
Contoso purchases a domain name adatum.com.
You need to change the primary SMTP address of all the users in SalesOU to use the SMTP suffix of
adatum.com. The solution must not remove the contoso.com email address.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Create a new email address policy and apply the policy to the users in SalesOU.
B. Change the default email address policy to include adatum.com.
C. Create a new remote domain for adatum.com.
D. Create a new accepted domain for adatum.com and set the domain type to Authoritative Domain.
E. Create a new accepted domain for adatum.com and set the domain type to External RelayDomain.
Answer: AD

Microsoft   certification 70-341   70-341   70-341
12. You are testing the planned implementation of Domain Security.
You discover that users fail to exchange domain-secured email messages.
You open the Exchange Management Shell and discover the output shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that users can exchange email messages by using Domain Security.
Which two parameters should you modify by using the Set-SendConnector cmdlet? (Each correct
answer presents part of the solution. Choose two.)
A. tlsauthlevel
B. requiretls
C. ignorestarttls
D. tlsdomain
E. domainsecureenabled
F. smarthostauthmechanism
Answer: BE

Microsoft   70-341   70-341   certification 70-341
13. You need to recommend which tasks must be performed to meet the technical requirements
of the research and development (R&D) department.
Which two tasks should you recommend? (Each correct answer presents part of the solution.
Choose two.)
A. Create a new global address list (GAL) and a new address book policy.
B. Modify the permissions of the default global address list (GAL), and then create a new GAL.
C. Run the Update AddressList cmdlet.
D. Run the Set-Mailbox cmdlet.
E. Create an OAB virtual directory.
Answer: AD

Microsoft examen   70-341   70-341   70-341 examen   70-341   70-341
14. You deploy a server that has the Exchange Server 2013 Mailbox server role and Client Access
server role installed.
You need to configure anti-spam to meet the following requirements:
-Email messages sent from the Internet to a distribution list named Executives must be rejected.
-Email messages that contain the words casino and jackpot must be rejected, unless they were sent
to legal@contoso.com.
Which three cmdlets should you run? (Each correct answer presents part of the solution. Choose
three.)
A. Add ContentFilterPhrase
B. Set-ContentFilterConfig
C. Set-TransportConfig
D. Set-SenderReputationConfig
E. Set-RecipientFilterConfig
Answer: ABE

Microsoft examen   certification 70-341   certification 70-341   certification 70-341   certification 70-341

NO.5 You have an Exchange Server 2013 organization.
You need to ensure that an administrator named Admin1 receives a daily email message that
contains a log of all the Exchange Server administrative actions.
Which cmdlet should you use in a scheduled task?
A. Set-AdminAuditLogConfig
B. Write-AdminAuditLog
C. New-AdminAuditLogSearch
D. Search-AdminAuditLog
Answer: C

certification Microsoft   70-341 examen   certification 70-341   70-341 examen

NO.6 You have an Exchange Server 2013 organization that contains two Client Access servers named
SERVER1 and SERVER2 and two Mailbox servers named SERVER3 and SERVER4. You have a firewall
that controls all of the traffic between the internal network and the Internet.
SERVER3 and SERVER4 are prevented from communicating with Internet hosts.
SERVER1 and SERVER3 are in a site named Main. SERVER2 and SERVER4 are in a site named Main_2.
All outbound email is sent through SERVER1.
Main fails.
You discover that email messages for the Internet are queued on SERVER4.
You create a new send connector in Main_2.
You discover that all of the outbound email is queued on SERVER4 and is not delivered to the
Internet.
You verify that the client computers on the network can receive email messages from the Internet
successfully.
You need to ensure that the email messages are delivered successfully to the Internet.
Which cmdlet should you run?
A. Set-SendConnector
B. Set-TransportService
C. Set-ExchangeServer
D. Set-ADSite
Answer: A

certification Microsoft   certification 70-341   70-341   70-341 examen

NO.7 You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2.
EX1 and EX2 are members of a database availability group (DAG) named DAG1.DAG1 contains four
mailbox databases.All databases are active on EX1 and replicate to EX2.
You start an unplanned maintenance on EX1 and shut down EX1.
You discover that the databases do not mount on EX2.
You restart EX1 and the databases mount automatically on EX1.
You need to identify what prevents the databases from switching over successfully to EX2.
Which cmdlet should you run?
A. Test-ServiceHealth
B. Test-OutlookConnectivity
C. Get-AvailabilityReportOutage
D. Test-ReplicationHealth
Answer: D

Microsoft   70-341 examen   70-341   certification 70-341

NO.8 You need to recommend a solution to resolve the issue of email messages not being received
on the Internet.
What should you include in the solution?
A. Modify the CNAME record.
B. Add an MX record.
C. Modify the TXT record.
D. Add a pointer (PTR) record.
Answer: C

Microsoft   70-341   70-341   70-341   certification 70-341

NO.9 You have network contoso.com. contoso.com consist of AD DS Domain contoso.com. All
Servers running Windows Server 2012 and all Clients running Windows 8 Pro.
Server1 runs Mailbox Server Role and Client Access Server Role
You are configuring Anti-Spam Filtering on Server1
You need to ensure that all emails with words "Free Credit Check"
are rejected unless the email is sent to Finance Distribution Group.
You also need to ensure that all emails from partner company
Domain name adatum.com bypass the Anti-Spam Filter.
You run the Add-ContentFilterPhrase and add the words "Free Credit Check"
What should you do next?
A. Run the Set-TransportConfig and Set-ContentFilterConfig
B. Run the Set-SenderReputationConfig and Set-TransportConfig
C. Run the Set-ContentFilterConfig and Set-RecipientFilterConfig
D. Run the Set-SenderFilterConfig and Set-RecipientFilterConfig
Answer: C

Microsoft   certification 70-341   70-341   70-341 examen   70-341 examen   70-341

C'est sûr que le Certificat Microsoft 70-341 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft 70-341, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft 70-341 peut bien tester la professionnalité de IT.

Pass4Test offre de Microsoft 70-688 matériaux d'essai

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Microsoft 70-688, la voie à la réussite de votre professionnel sera ouverte pour vous.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft 70-688.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Microsoft 70-688, et aussi une meilleure assurance du succès du test 70-688. Vous choisissez Pass4Test, vous choisissez le succès.

On doit faire un bon choix pour passer le test Microsoft 70-688. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft 70-688 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Code d'Examen: 70-688
Nom d'Examen: Microsoft (Managing and Maintaining Windows 8)
Questions et réponses: 95 Q&As

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-688. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-688 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-688. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

70-688 Démo gratuit à télécharger: http://www.pass4test.fr/70-688.html

NO.1 You are a systems administrator for your company. The company has employees who work
remotely
by using a virtual private network (VPN) connection from their computers, which run Windows 8
Pro.
These employees use an application to access the company intranet database servers. The company
recently decided to distribute the latest version of the application through using a public cloud.
Some
users report that every time they try to download the application by using Internet Explorer, they
receive a
warning message that indicates the application could harm their computer. You need to recommend
a
solution that prevents this warning message from appearing, without compromising the security
protection
of the computers.
What should you do?
A. Publish the application through an intranet web site.
B. Publish the application to Windows Store.
C. Digitally sign the application by using a trusted certificate, and then update the default App
Package
Deployment policy on all computers.
D. Obtain a public certificate for the web server, and then configure the web site to use SSL.
E. Change the default Applications Control Policies on the client computers.
F. Change the default Software Restriction Policies on the client computers.
G. Instruct employees to disable the SmartScreen Filter from within the Internet Explorer settings.
H. Publish the application through a public file transfer protocol (FTP) site.
Answer: B OR C

Microsoft examen   certification 70-688   70-688 examen   certification 70-688   70-688

NO.2 [DRAG And DROP]
You have a computer that runs Windows 8. You have a 1-terabyte external hard drive. You purchase
a
second 1-terabyte external hard drive. You need to create a fault-tolerant volume that includes both
external hard drives. You also need to ensure that additional external hard drives can be added to
the
volume.
Which three actions should you perform in sequence? (To answer, move the appropriate actions
from the
list of actions to the answer area and arrange them in the correct order.)
A. From Control Panel, use Storage Spaces to create a new pool. Set Resiliency Type to two-way
mirror.
B. From Control Panel, use Storage Spaces to create a new pool. Set Resiliency Type to parity.
C. From Disk Management, create a new volume on the second USB drive. Format the new volume.
D. Back up the existing data on your old USB drive.
E. Schedule a backup job to automatically copy your data to the second USB drive.
F. From Disk Manager, create a mirror between the two USB drives.
G. Restore your data to the new pool from back-up.
Answer: E,A,G

Microsoft   certification 70-688   70-688   70-688 examen

NO.3 You administer computers that run Windows 8 Pro. You have secured the computers by using
BitLocker. You have distributed a new application to the computers. Users report that file
associations for
ZIP archives is broken and users are unable to open ZIP files. You need to design a solution that
recovers
file association. You also need to ensure that BitLocker encryption settings are maintained.
What should you do?
A. Delete the HKEY_CLASSES_ROOT\exefile\shell\open\command registry key.
B. Restore computer from the latest restore point.
C. Modify setting in Change default settings for media or devices.
D. Select Reset your PC.
Answer: B

Microsoft   70-688   70-688   70-688   70-688

NO.4 At work, you use a desktop computer that runs Windows 8 Pro. At home, you use a laptop
that runs
Windows 8. You use the same Microsoft account to log on to both computers. You want to use the
same
settings for both computers. You need to ensure that all computer settings, including stored
passwords,
are synced between the computers.
What should you do.?
A. Add both computers to the same workgroup.
B. Join both computers to the same HomeGroup.
C. Enable the Guest account on both computers.
D. Designate both computers as trusted PCs.
Answer: D

Microsoft examen   70-688   70-688 examen   70-688

NO.5 You administer laptop and desktop computers that run Windows 8 Pro. Your company uses
Active
Directory Domain Services (AD DS) and Active Directory Certificate Services (AD CS). Your company
decides that access to the company network for all users must be controlled by two-factor
authentication.
You need to configure the computers to meet this requirement.
What should you do?
A. Enable the Password must meet complexity requirements policy setting. Instruct users to log on
by
using the domain\username format for their username and their strong password.
B. Install smart card readers on all computers. Issue smart cards to all users.
C. Issue photo identification to all users. Instruct all users to set up and use PIN Logon.
D. Create an Internet Protocol security (IPsec) policy that requires the use of Kerberos to
authenticate all
traffic. Apply the IPsec policy to the domain.
Answer: B

Microsoft   70-688 examen   70-688   certification 70-688

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Microsoft 70-688 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Microsoft 70-688.

Meilleur Microsoft 070-689 test formation guide

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Microsoft 070-689 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Microsoft 070-689 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Microsoft 070-689.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

En quelques années, le test de certification de Microsoft 070-689 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Microsoft 070-689? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 070-689. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 070-689, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Il y a nombreux façons à vous aider à réussir le test Microsoft 070-689. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Microsoft 070-689 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Microsoft 070-689 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft 070-689.

Code d'Examen: 070-689
Nom d'Examen: Microsoft (Upgrading Your Skills to MCSA Windows 8)
Questions et réponses: 75 Q&As

070-689 Démo gratuit à télécharger: http://www.pass4test.fr/070-689.html

NO.1 A company has client computers that run Windows 8.
You install a new device on a client computer. The device installation includes an application that
runs when the computer starts. You experience problems with the application.
You need to prevent the application from running when the computer starts, without affecting any
other application.
What should you do?
A. Configure the device by using Device Manager.
B. Run the msconfig command.
C. Run the bcdedit command.
D. Configure the application by using Task Manager.
Answer: D

Microsoft   070-689   certification 070-689   certification 070-689

NO.2 Your company has purchased a subscription to Windows Intune. You use Windows Intune to
automatically deploy Windows updates.
You create an automatic approval rule in Windows Intune but notice that previously existing
updates are not deployed.
You need to ensure that all previously existing updates are automatically approved.
What should you do?
A. Create and deploy a policy that uses the recommended settings in the Windows Intune Center
Settings template.
B. Edit the schedule for the automatic approval rule.
C. Create and deploy a custom policy in the Windows Intune Center Settings template.
D. Run the approval rule.
Answer: D

certification Microsoft   certification 070-689   070-689   070-689 examen

NO.3 An organization has client computers that run Windows 7. You upgrade the client computers
to Windows 8 without migrating the local user profiles.
You install the Windows Assessment and Deployment Kit (ADK) in the environment.
You need to migrate the user profiles from the Windows 7 installation to the Windows 8
installation.
What should you do first on each client computer?
A. Copy the Default Profile to a folder on drive C.
B. Run Windows Easy Transfer and select the user profile to migrate.
C. Run the scanstate command.
D. Run the loadstate command.
E. Run the ImageX command.
Answer: C

certification Microsoft   certification 070-689   070-689

NO.4 A company has 100 client computers that run Windows XP 64-bit Edition.
You are deploying new computers that run a 32-bit version of Windows 8.
You need to transfer the contents of each user's Documents folder to the new computer by using
the least
amount of administrative effort.
What should you do?
A. Manually copy the folder content to a USB flash drive. Then paste the files to the new computer.
B. Use the User State Migration Tool.
C. Use Windows Easy Transfer.
D. Back up the folders by running the NTBackup command. Then restore the backup to the new
computer.
Answer: A

Microsoft   070-689   070-689   070-689 examen   070-689

NO.5 You support computers that run Windows 8 Enterprise. Your company protects all laptops by
using the BitLocker Network Unlock feature.
Some employees work from home.
You need to ensure that employees can log on to their laptops when they work from home.
What should you do?
A. Have users run the Manage-bde.exe -unlock command before they disconnect from the company
network.
B. Enable BitLocker To Go.
C. Provide employees their BitLocker PINs.
D. Ensure that the Trusted Platform Module (TPM) chips in the laptops are version 1.2 or greater.
Answer: A

Microsoft examen   070-689 examen   certification 070-689   070-689

NO.6 You install Windows 8 on a desktop computer and install a third-party desktop app.
The computer runs optimally until you install another third-party desktop app. You need to remove
only the most recently installed third-party desktop app.
You start the computer from a system repair disk.
Which troubleshooting option should you use?
A. Remove everything and install Windows
B. Refresh your PC without affecting your files
C. System Restore
D. System Image Recovery
Answer: C

Microsoft   certification 070-689   070-689   070-689

NO.7 You update the video card driver on a portable computer that runs Windows 8.
When a user connects the portable computer to an external monitor, the external monitor
duplicates the
display on the portable computer screen.
You need to ensure that the user can display additional desktop space on the external monitor.
What should you do?
A. Run the DisplaySwitch /extend command.
B. Start the computer from the Windows 8 installation media and perform a system image recovery.
C. Run the sfc /scannow command.
D. Roll back the video card driver to the previous version.
Answer: A

certification Microsoft   070-689   070-689

NO.8 You have computers that run Windows 8 Enterprise. Microsoft BitLocker Administration and
Monitoring (MBAM) is deployed on your network on a server named MBAM1.
Company policy requires that within 2 hours of being started, computers that have the MBAM client
installed prompt users to enable BitLocker.
You need to make changes to the Configure MBAM Services Group Policy settings.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Set MBAM Recovery and Hardware service endpoint to MBAM1.
B. Set Select Bitlocker Recovery Information to store to Recovery password only.
C. Set Enter status reporting frequency (in minutes) to 120.
D. Set Select Bitlocker Recovery Information to store to Recovery password and key package.
E. Set Enter client checking status frequency (in minutes) to 120.
F. Set MBAM Status reporting endpoint to MBAM1.
Answer: AD

Microsoft examen   070-689 examen   070-689

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 070-689. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 070-689.

Pass4Test offre une formation sur Microsoft 072-642 matériaux examen

La Q&A Microsoft 072-642 de Pass4Test est liée bien avec le test réel de Microsoft 072-642. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft 072-642 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Microsoft 072-642 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Microsoft 072-642. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Microsoft 072-642, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Microsoft 072-642 à la première fois.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Microsoft 072-642, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Code d'Examen: 072-642
Nom d'Examen: Microsoft (TS: Windows Server 2008 Network Infrastructure, Configuring Certification)
Questions et réponses: 200 Q&As

072-642 Démo gratuit à télécharger: http://www.pass4test.fr/072-642.html

Pass4Test peut offrir nombreux de documentations aux candidats de test Microsoft 072-642, et aider les candidats à réussir le test. Les marétiaux visés au test Microsoft 072-642 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Microsoft 072-642 100%.

Dernières Microsoft 70-460 de la pratique de l'examen questions et réponses téléchargement gratuit

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-460. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-460 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-460. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Code d'Examen: 70-460
Nom d'Examen: Microsoft (Transition Your MCITP: Business Intelligence Developer 2008 to MCSE: Business Intelligence)
Questions et réponses: 62 Q&As

Après une longue attente, les documentations de test Microsoft 70-460 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-460 à la première fois.

La Q&A Microsoft 70-460 de Pass4Test est liée bien avec le test réel de Microsoft 70-460. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft 70-460 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

70-460 Démo gratuit à télécharger: http://www.pass4test.fr/70-460.html

NO.1 You are modifying a SQL Server Reporting Services (SSRS) report for a SQL Server Analysis
Services (SSAS) cube. The report defines a report parameter of data type Date/Time with which
users can filter the report by a single date. The parameter value cannot be directly used to filter the
Multidimensional Expressions (MDX) query for the dataset. You need to ensure that the report
displays data filtered by the user-entered value. You must achieve this goal by using the least
amount of development effort. What should you do? (More than one answer choice may achieve
the goal. Select the BEST answer.)
A. Edit the dataset query parameter. Change the Value property of the report parameter to an
expression that uses the same format as the date dimension member key value.
B. Change the dataset query to Transact-SQL (T-SQL). Use the OPENROWSET function to query the
cube. Output the cube results to the T-SQL query and use a Convert function to change the report
parameter value into the same format as the date dimension member.
C. Edit the dataset query parameter. Create a subcube subquery that uses the StrToSet MDX
function and accepts the report parameter value.
D. Edit the dataset query parameter. Change the Name property of the dataset query parameter so
that it points to a name value for each date dimension member.
Answer: A

certification Microsoft   70-460   70-460

NO.2 You are developing a SQL Server Analysis Services (SSAS) tabular project. You need to grant the
minimum permissions necessary to enable users to query data in a data model.
Which role permission should you use?
A. Browser
B. Process
C. Read
D. Administrator
E. Explorer
F. Select
Answer: C

certification Microsoft   70-460   70-460   70-460 examen   70-460 examen

NO.3 You are developing a SQL Server Analysis Services (SSAS) tabular project. The model includes a
table named DimEmployee. The table contains employee details, including the sales territory for
each employee.
The table also defines a column named EmployeeAlias which contains the Active Directory Domain
Services (AD DS) domain and logon name for each employee. You create a role
named Employees. You need to configure the Employees roles so that users can query only sales
orders for their respective sales territory.
What should you do?
A. Add a row filter that implements the LOOKUPVALUE and CUSTOMDATA functions.
B. Add a row filter that implements only the USERNAME function.
C. Add a row filter that implements the LOOKUPVALUE and USERNAME functions.
D. Add a row filter that implements only the CUSTOMDATA function.
Answer: C

certification Microsoft   certification 70-460   70-460

NO.4 You are designing a SQL Server 2012 Integration Services (SSIS) deployment strategy. You
currently have many SQL Server 2008 SSIS packages that require upgrading. The production
environment
includes SSIS 2012 and SSIS 2008. The environment includes existing command shell scripts that
invoke the dtutil command-line utility. You need to design a deployment strategy that supports
existing deployment
strategies and requires the minimum amount of effort.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Use a project deployment model. Change the command shell scripts to reference the SQL Server
2012 path to dtutil.
B. Use a project deployment model. Use the Integration Services Deployment Wizard.
C. Use a package deployment model. Use the Integration Services Deployment Wizard.
D. Use a package deployment model. Change the command shell scripts to reference the SQL Server
2012 path to dtutil.
Answer: D

certification Microsoft   70-460 examen   70-460   certification 70-460

NO.5 You are developing a SQL Server Analysis Services (SSAS) tabular project. A model contains
tables and columns that must not be visible to the user. The columns and tables cannot be removed
because they are used in calculations. You need to hide the tables and columns.
What should you do?
A. Right-click the applicable tables and columns and select the Hide option.
B. Right-click the applicable tables and columns and select the Hide from Client Tools option.
C. In the Properties window for the applicable tables and columns, set the Enabled property to
False.
D. In the Properties window for the applicable tables and columns, set the Visible property to True.
Answer: B

certification Microsoft   70-460 examen   70-460 examen   70-460   70-460

NO.6 You are designing a subscription strategy for a SQL Server Reporting Services (SSRS) report.
You have an application that populates a table with user-specific subscription schedules and report
formats. You need to ensure that users can receive reports by email according to their preferences.
Email messages will be sent via an internal mail server.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Create a standard SSRS subscription for each subscription schedule.
B. Create one data-driven SSRS subscription. Schedule the subscription to frequently retrieve user
preferences.
C. Create a data-driven SSRS subscription for each record in the schedule table.
D. Create a standard SSRS subscription for each record in the table.
Answer: B

Microsoft examen   70-460 examen   certification 70-460   70-460   70-460 examen

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 70-460, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 70-460 coûtant un peu d'argent.

Les meilleures Microsoft 070-512-Csharp examen pratique questions et réponses

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Microsoft 070-512-Csharp peut vous assurer à réussir 100% le test Microsoft 070-512-Csharp. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Microsoft 070-512-Csharp pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Microsoft 070-512-Csharp réel est lancée. C'est possible à réussir 100% avec le produit de Microsoft 070-512-Csharp. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Les produits de Pass4Test sont préparés pour le test Certification Microsoft 070-512-Csharp, y compris les formations et les informations ciblées au test Microsoft 070-512-Csharp. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Le test Microsoft 070-512-Csharp est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft 070-512-Csharp joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Microsoft 070-512-Csharp. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Microsoft 070-512-Csharp sans aucune doute.

Code d'Examen: 070-512-Csharp
Nom d'Examen: Microsoft (TS: Visual Studio Team Foundation Server 2010, Administration(CSHARP))
Questions et réponses: 60 Q&As

070-512-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-512-Csharp.html

NO.1 Your company has a main office and a branch office. You are installing Visual Studio
Team Foundation Server 2010 at the main office. You need to minimize the bandwidth
required to access versioncontrolled files from the branch office. What should you do?
A. Install Team Foundation Server Proxy at the main office. Configure the Team
Explorer client applications at the branch office to connect to the proxy server.
B. Install Team Foundation Server Proxy at the branch office. Configure the Team
Explorer client applications at the branch office to connect to the proxy server.
C. Create a team project collection for the branch office. Configure the Team Explorer
client applications at the branch office to connect to the application tier at the main office.
D. Install an application tier server at the branch office and configure it to connect to
Team Foundation Server. Configure the Team Explorer client applications at the branch
office to connect to the application tier server at the branch office.
Answer: B

Microsoft examen   070-512-Csharp   070-512-Csharp examen

NO.2 You install Visual Studio Team Foundation Server 2010. You have an existing Microsoft
Office SharePoint Server (MOSS) 2007 server that uses Microsoft SQL Server 2008.
You need to configure Team Foundation Server to use the existing SQL Server and
SharePoint servers. Which two actions should you perform? (Each correct answer
presents part of the solution. Choose two.)
A. Install and configure the Team Foundation Server Extensions for SharePoint Products
on the MOSS 2007 server.
B. Install and configure the Team Foundation Server 2010 SharePoint Package (.wsp)
files on the MOSS 2007 server.
C. Run the configuration wizard on an application tier server, using the Advanced option.
D. Run the configuration wizard on an application tier server, using the ApplicationTier
Only option.
Answer: A, C

Microsoft   070-512-Csharp examen   070-512-Csharp examen   070-512-Csharp examen

NO.3 You are setting up a Visual Studio Team Foundation Server 2010 environment. The
environment includes a Microsoft SQL Server 2008 cluster. You need to ensure high
availability and redundancy for the frontend Web servers in the Team Foundation Server
environment. What should you do?
A. Install a virtual application tier server and create a snapshot. B.
Install two application tier servers. Use one as a coldstandby. C.
Install two application tier servers. Use one as a warmstandby.
D. Install multiple application tier servers with network load balancing.
Answer: D

Microsoft   certification 070-512-Csharp   070-512-Csharp examen   certification 070-512-Csharp   070-512-Csharp

NO.4 You have a dualtier Visual Studio Team Foundation Server 2010 environment. You run
Windows SharePoint Services 3.0 on the application tier server. You configure Team
Foundation Server to support an existing SharePoint Web application. When you attempt
to create a new team project portal in the existing SharePoint Web application, you
receive the following error: TF218017: A SharePoint site could not be created for use as
the team project portal. The following error occurred: TF250034: An access grant could
not be found between Team Foundation Server and the SharePoint Web application that
you specified. You need to ensure that Team Foundation Server integrates with the
SharePoint Web application. What should you do in the Team Foundation Server
Administration Console?
A. In the Extensions for SharePoint Products node, grant access to Team Foundation
Server.
B. In the Extensions for SharePoint Products node, modify access to the SharePoint Web
application.
C. In the SharePoint Web Applications node, add the SharePoint Web application to
Team Foundation Server.
D. In the SharePoint Web Applications node, remove the SharePoint Web application
from Team Foundation Server.
Answer: A

Microsoft examen   070-512-Csharp examen   070-512-Csharp

NO.5 You plan to install a dualtier
Visual Studio Team Foundation Server 2010 environment using two servers named
Server1 and Server2.
You install and configure Microsoft SQL Server 2008 and SQL Server 2008 Analysis
Services on Server1.
You install and configure IIS 7.5, SQL Server Reporting Services, and Windows
SharePoint Services 3.0 on Server2.
You need to install and configure Team Foundation Server using the two servers. What
should you do?
A. Install Team Foundation Server on Server2 and run the configuration wizard on
Server2 using the Basic option.
B. Install Team Foundation Server on Server2 and run the configuration wizard on
Server2 using the Advanced option.
C. Install Team Foundation Server on Server1 and Server2. Run the configuration wizard
on Server1 using the Basic option. Run the configuration wizard on Server2 using the
ApplicationTier Only option.
D. Install Team Foundation Server on Server1 and Server2. Run the configuration wizard
on Server1 using the Advanced option. Run the configuration wizard on Server2 using
the ApplicationTier Only option.
Answer: B

Microsoft examen   070-512-Csharp   certification 070-512-Csharp   certification 070-512-Csharp   070-512-Csharp examen

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Microsoft 070-512-Csharp. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Le meilleur matériel de formation examen Microsoft 070-577

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Peut-être vous voyez les guides d'études similaires pour le test Microsoft 070-577, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Microsoft 070-577 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Microsoft 070-577 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Microsoft 070-577 réel est lancée. C'est possible à réussir 100% avec le produit de Microsoft 070-577. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Code d'Examen: 070-577
Nom d'Examen: Microsoft (Microsoft Windows@ Embedded Standard 2009, Development)
Questions et réponses: 75 Q&As

Si vous êtes intéressé par l'outil formation Microsoft 070-577 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Votre vie changera beaucoup après d'obtenir le Certificat de Microsoft 070-577. Tout va améliorer, la vie, le boulot, etc. Après tout, Microsoft 070-577 est un test très important dans la série de test Certification Microsoft. Mais c'est pas facile à réussir le test Microsoft 070-577.

Pass4Test est un catalyseur de votre succès de test Microsoft 070-577. En visant la Certification de Microsoft, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Microsoft 070-577, la Q&A Microsoft 070-577 est un bon choix pour vous.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

070-577 Démo gratuit à télécharger: http://www.pass4test.fr/070-577.html

NO.1 You are creating a Windows Embedded Standard run-time image. You need to identify
the file system component that meets the following requirements:
Set access level to files and folders for each user level.
Allow transparent encryption of files and directories for users and programs. Which
component should you use?
A. NTFS file system (NTFS)
B. File Allocation Table (FAT)
C. Compact Disc File System (CDFS)
D. Universal Disk File System (UDFS)
Answer: A

Microsoft   070-577 examen   070-577   070-577   070-577 examen

NO.2 You are developing a Windows Embedded Standard device that contains multiple user
accounts. You add the required number of User Account components. You need to
configure the User Account components to meet the following requirements:
Users must be able to modify the system settings.
Users must be unable to install programs that affect the system files. Which User Type
should you set?
A. Guest
B. User
C. Power User
D. Administrator
Answer: C

Microsoft examen   certification 070-577   070-577 examen   070-577   070-577

NO.3 You are creating a Windows Embedded Standard run-time image. You need to create
multiple user accounts. What should you do?
A. Add multiple instances of the User Account component to the SLX file.
B. Add the Administrator Account component to multiple SLX files.
C. Use Component Designer to create a component that includes a custom security
template (.inf) file.
D. Add the User Account component to multiple SLX files.
Answer: A

certification Microsoft   070-577 examen   certification 070-577   070-577   070-577

Si vous traviallez dur encore pour préparer le test de Microsoft 070-577 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Microsoft 070-577.

Le matériel de formation de l'examen de meilleur Microsoft 070-511-VB

Pass4Test est un bon site d'offrir la facilité aux candidats de test Microsoft 070-511-VB. Selon les anciens test, l'outil de formation Microsoft 070-511-VB est bien proche de test réel.

Votre vie changera beaucoup après d'obtenir le Certificat de Microsoft 070-511-VB. Tout va améliorer, la vie, le boulot, etc. Après tout, Microsoft 070-511-VB est un test très important dans la série de test Certification Microsoft. Mais c'est pas facile à réussir le test Microsoft 070-511-VB.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Microsoft 070-511-VB. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Microsoft 070-511-VB. Choisir le produit de Pass4Test particulier pour le test Certification Microsoft 070-511-VB vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Code d'Examen: 070-511-VB
Nom d'Examen: Microsoft (TS:Windows Apps Dev w/Microsoft .NET Framework 4)
Questions et réponses: 72 Q&As

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Microsoft 070-511-VB peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Microsoft 070-511-VB est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Microsoft 070-511-VB.

On peut voir que beaucoup de candidats ratent le test Microsoft 070-511-VB quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 070-511-VB est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 070-511-VB, Pass4Test peut offrir les Q&As des autres test Certification IT.

070-511-VB Démo gratuit à télécharger: http://www.pass4test.fr/070-511-VB.html

NO.1 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation
(WPF) application. You write the following code fragment.
<StackPanel TextBox.PceviewTextInput="StackPanel_PreviewTextInput">
<TextBox Name="TxtBoxA"/>
<TextBox Name-"TxtBoxB"/>
<TextBox Naroe-"TxtBoxC"/>
</StackPanel>
You create an event handler named StackPanel_PreviewTextInput. You also have a
collection of strings named Keywords. You need to ensure that TxtBoxA and TxtBoxB
do not contain any of the strings in the Keywords collections. Which code segment
should you use?
A. Private Sub StackPanel_PreviewTextInput(sender As Ctoject, e
AsTextCompositionEventArgs) Dim feSource As FrameworkElement = TryCast(sender,
FrameworkElement)
If feSource.Name - "TxtBoxA" OrElse feSource.Name - "TxtBoxB" Then
For Each keyword As String In Keywords
If e.Text.Contains(keyword) Then
B. Handled = False
Return End If Next
C. Handled = True
End If
End Sub
D. Private Sub StackPanel_PreviewTextInput(sender As Object e As
TextCompositionEventArgs) Dim feSource As FrameworkElement = TryCast(e.Source,
FrameworkElement)
If feSource.Name = "TxtBoxA" OrElse feSource.Name = "TxtBoxB" Then
For Each keyword As String In Keywords
If e.Text.Contains(keyword) Then e.HandledFalse Return
End If
Next
E. Handled = True
End If
End Sub
F. Private Sub StackPanel_PreviewTextInput(sender As Object, e As
TextCompositionEventArgs) Dim feSource As FrameworkElement = TryCast(sender,
FraroeworkElement)
If feSource.Name = "TxtBoxA" OrElse feSource.Name = "TxtBoxB" Then
For Each keyword As String In Keywords
If e.Text.Contains(keyword) Then e.Handled = True Return
End If
Next
G. Handled = False
End If
End Sub
H. Private Sub StackPanel_PreviewTextInput(sender As Ctoject, e As
TextCompositionEventArgs) Dim feSource As FrameworkElement = TryCast(e.Source,
FrameworkElement)
If feSource.Name = "TxtBoxA" OrElse feSource.Name = "TxtBoxB" Then
For Each keyword As String In Keywords
If e.Text.Contains(keyword) Then e.Handled = True
Return End If Next
I. Handled = False
End If
End Sub
Answer: D

Microsoft   070-511-VB examen   certification 070-511-VB   070-511-VB   070-511-VB

NO.2 You are developing a user control for a Windows Presentation Foundation (WPF)
application. The user control contains a button. Both the user control and the hosting
control must receive the button click event. You need to ensure that the user control
responds to the button click event before the hosting control responds to the event. What
should you do?
A. Use a bubbling routed event. In the button click event handler, set the Handled
property to True.
B. Use a bubbling routed event. In the button click event handler, set the Handled
property to False.
C. Use a standard Microsoft .NET event. Set the Handled property to True.
D. Use a tunneling routed event. Set the Handled property to False.
Answer: C

Microsoft   070-511-VB   070-511-VB   070-511-VB   070-511-VB

NO.3 You are developing a Windows Presentation Foundation (WPF) application. You have
the following style defined in the app.xaml file.
<Style x:Key="btnItalic" x:Name="styIeItalic"
TargetType="{ x:Type Button}">
Setter Property="FontStyle" Value="Itallc"/> </Style>
You need to apply this style to a button named buttonl in the application at run time.
Which code segment should you use?
A. button1.Style = TryCast(Me.FindName("styleItallc"),Style)
B. button1.Style = TryCast(Me.FindName("btnItalic"), Style)
C. button1.Style =
TryCast(Me.FindResource("btnItalic"), Style)
D. button1.Style = TryCast(Me.FindResource("styleItalic"), Style)
Answer: C

certification Microsoft   070-511-VB   070-511-VB examen   certification 070-511-VB   certification 070-511-VB

Le test simulation Microsoft 070-511-VB sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Microsoft 070-511-VB à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Pass4Test offre une formation sur Microsoft 070-404 matériaux examen

Selon les anciens test Microsoft 070-404, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft 070-404. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Le test Certification Microsoft 070-404 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Microsoft 070-404. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Microsoft 070-404.

Code d'Examen: 070-404
Nom d'Examen: Microsoft (TS: System Center Service Manager 2010, Configuring (available in 2010))
Questions et réponses: 165 Q&As

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Le test Certificat Microsoft 070-404 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 070-404. Vous allez prendre toutes essences du test Microsoft 070-404 dans une courte terme.

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Microsoft 070-404 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Microsoft 070-404 qui vous amenera le succès du test Microsoft 070-404, au lieu de traivailler avec peine et sans résultat.

070-404 Démo gratuit à télécharger: http://www.pass4test.fr/070-404.html

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft 070-404. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

Le matériel de formation de l'examen de meilleur Microsoft 074-343

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 074-343. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Selon les anciens test Microsoft 074-343, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Code d'Examen: 074-343
Nom d'Examen: Microsoft (Managing Projects with Microsoft Project 2013)
Questions et réponses: 101 Q&As

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 074-343 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 074-343 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 074-343 plus facilement avec la Q&A de Pass4Test.

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 074-343 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

L'importance de la position de Certificat Microsoft 074-343 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Microsoft 074-343 par votre première fois.

Pass4Test a de formations plus nouvelles pour le test Microsoft 074-343. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft 074-343 à tous les candidats qui nous choisissent. L'importance de Certification Microsoft 074-343 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

La population de la Certification Microsoft 074-343 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

074-343 Démo gratuit à télécharger: http://www.pass4test.fr/074-343.html

NO.1 You are project manager who uses Project Professional 2013. Your organization uses Microsoft
SharePoint 2013 and uses a SharePoint task list to define the tasks required on an upcoming project.
The task list contains over 100 items. You need to create a project based on the tasks in the
SharePoint list in the most efficient manner. What should you do?
A. Export the tasks into Microsoft Excel and then import the Excel file into Project Professional 2013.
B. Edit the Project Summary Task hyperlink column to point to the SharePoint task list and click the
Import button.
C. Open the tasks directly from the SharePoint site into Project Professional 2013.
D. Copy and paste the tasks from SharePoint into Project Professional 2013.
Answer: C

Microsoft   certification 074-343   074-343 examen   certification 074-343

NO.2 You are a project manager who uses Project Standard 2013. You have been told to build
multiple project files for a program. You need to have all of your projects start with auto scheduled
tasks by default. What should you do?
A. Under schedule options, set New tasks created to Auto Scheduled for each project.
B. Use the Task Mode field to change the first task to Auto Schedule, then copy down for all of your
tasks.
C. Under schedule options, set New tasks created to Auto Scheduled for all new projects.
D. Highlight all of the tasks in your schedule and select the Auto Schedule button.
Answer: C

Microsoft   074-343   074-343 examen   certification 074-343   certification 074-343

NO.3 You are a project manager, and you successfully complete a server consolidation project for
one of your data centers. You use Project Standard 2013 to plan and track the work. Your manager
wants you to begin similar projects on two other data centers. You need to create a template based
on the plan you used to manage the first data center consolidation project. You need to ensure that
the template has all baseline and actual data values removed. What should you do?
A. Within Microsoft Windows Explorer, create a copy of the original project plan and rename the
file type from .mpp to .mpt.
B. Open the plan and use the Move Project button to set the start date to the start of the new
project. Save the project file as Template.mpp.
C. Open the plan and reset the percent complete for each task to 0. Save the file as Template.mpp.
D. Open the plan and save the plan as a Project Template.
E. Open the plan, and copy and paste all of the task information into a new plan. Save the plan as a
Project Template.
Answer: D

Microsoft examen   certification 074-343   074-343 examen   074-343

NO.4 You are a senior project manager, and your organization uses Project Standard 2013. You are
managing a large ERP project with both part-time and full-time resources. The part-time resources
have strict contractual limitations regarding working days and hourly availability. You need to make
sure the tasks for your part-time resources are only scheduled in the calendar during their
agreed-upon working days and hours.
What should you do?
A. Change the part-time resources' tasks to manually scheduled to ensure the dates do not go past
the agreed-upon terms of their contract.
B. Enter the availability start and end dates for each resource and change the percent of units to the
agreed-upon amount in their contract.
C. Enter the availability start and end dates for each resource and change the working time for each
resource to only include days and hours agreed upon in their contract.
D. Change the part-time resources' units to the percentage they are available and set task
constraints to must finish on to ensure the dates do not go past the agreed- upon terms of their
contract.
Answer: C

Microsoft examen   074-343   074-343   074-343   074-343

NO.5 You are a resource manager who uses Project Standard 2013. You manage all of your
resources in a single plan, which acts as a Shared Resource Pool for other projects in your
organization. Each resource needs to pass an annual exam in order to work on construction sites.
You need to set up a method that allows you to pick the renewal month for each resource. What
should you do?
A. Rename the Resource Text1 Custom field to Exam Expiration Date. Enter the month when the
exam expires. Select the correct expiration date for each resource.
B. Use the Organizer to copy the Resource Finish1 Custom field from the Global.mpt. Select the
correct expiration date for each resource.
C. Rename the Resource Date1 Custom field to Exam Expiration Date. Create a Lookup table with
values containing the last date of each month. Select the correct expiration date for each exam.
D. Rename the Resource Month1 Custom field to Exam Expiration Date. Create a Lookup table with
monthly values. Select the correct expiration month for each exam.
E. Rename the Resource Flag1 Custom field to Exam Expired Date. Enter the expiration dates into a
Lookup table. Select the correct expiration date for each resource.
Answer: C

certification Microsoft   074-343   074-343   074-343   certification 074-343

NO.6 You are a project manager who uses Project Professional 2013. You work on a construction
project that requires propane as a fuel source for your equipment. The foreman requires that you
enter project costs associated with all work completed on your project. The propane costs $5.00 per
gallon, and the tank holds 500 gallons of propane. Each time the tank is refilled, you must pay a fee
of $20. You need to enter the propane costs into your project schedule prior to filling the propane
tank for the first time. What should you do?
A. Create a material resource with a material label of gallons. Enter $20 in the cost per use and
$5.00 in the standard rate.
B. Create a cost resource, add the resource to a task, and enter $25 in the actual cost.
C. Create a material resource with a material label of gallons. Enter $20 in the standard rate and
$5.00 in the cost per use.
D. Create a cost resource, add the resource to a task, and enter $2520 in the actual cost.
Answer: B

Microsoft   074-343 examen   074-343 examen   074-343   certification 074-343

NO.7 Your organization uses Project Professional 2013 and records actual hours worked on the
project.
You manage a small e-commerce website implementation project.
One of your testers asks for assistance in completing a critical task, and you find two additional
testing resources that can assist with executing the critical test cases.
The total estimated work for the effort-driven task is 100 hours. The original testing resource,
Resource1, completes 25 hours of work on the task. You need to add Resource2 and Resource3 to
the task and split the remaining hours across all three resources now working on the task. Which
two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Open the Task Form and format it to show Work Details. Enter 25 hours of actual work for
Resource1. Then save the changes.
B. Open the Task Form and format it to show Work Details. Enter 75 hours of remaining work for the
assigned resource. Then save the changes.
C. Assign Resource2 and Resource3 to the task. Then save the changes.
D. Open the Task Form and format it to show Work Details. Enter 33.33 hours of work for each
resource. Then save the changes.
Answer: A, C

Microsoft   074-343 examen   074-343

NO.8 Your organization uses Microsoft Project 2013. You are finalizing the Project Schedule for a
very complex project with over 100 resources. You need to ensure that all tasks are assigned to
resources. What should you do?
A. Use Task Usage view and look for Unassigned tasks.
B. Use Resource Graph view and look for the Unassigned resource name.
C. Use Resource Usage view and look for the Unassigned resource name.
D. Use Resource Sheet view and look for Unassigned tasks.
Answer: C

Microsoft   074-343 examen   074-343

NO.9 Your company uses Project Professional 2013. You are setting up a preliminary schedule by
using manually scheduled tasks. You create a task with no duration, start, or finish date, and then
you assign a resource. Later, you enter a duration of three days for that task. You need to let the
resource know how the Work will be affected. What should you say?
A. Work will increase to 24 hours.
B. Work will remain at 0 hours.
C. Work will increase to 16 hours.
D. Work will remain at 8 hours.
Answer: A

certification Microsoft   certification 074-343   074-343 examen   certification 074-343

NO.10 Your organization uses Project Professional 2013.
A senior stakeholder in a project asks you to determine when a task is over budget by comparing
the baseline cost of a task to the cost.
Additionally, the senior stakeholder wants you to display a graphic indicator when the baseline cost
is greater than the cost.
You write a formula to display the indicator, but it only displays for normal tasks and not for
summary tasks.
You need to make the indicator display for summary tasks. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Within the Custom Field, set Calculation for task and group summary rows to Use Formula.
B. Within the Custom Field, set Calculation for task and group summary rows to Maximum.
C. Within the Graphical Indicators dialog box, check the Import Indicator Criteria button.
D. Within the Graphical Indicators dialog box, check Summary rows inherit criteria from
nonsummary row.
Answer: A,D

certification Microsoft   074-343 examen   certification 074-343   074-343

NO.11 You are a project manager, and your organization uses Project Professional 2013.
You have created a detailed project schedule and have identified two tasks that are causing your
resource to be overallocated.
You need to use the Team Planner to reassign these
tasks from the overallocated resources to underallocated resources with the same skill set. What
should you do?
A. Right-click the task and reassign it to the underallocated resource.
B. Drag the underallocated resource on the task to reassign it.
C. Drag one of the tasks from the overallocated resource to the Unassigned Tasks section.
D. Right-click the resource and reassign it to the underallocated resource.
Answer: A

certification Microsoft   074-343 examen   074-343

NO.12 You are a project manager who uses Project Standard 2013.
You are creating a preliminary project schedule and are estimating the number of resources
required prior to finalizing the schedule.
You do not have named resources to complete the tasks, but you know the resource roles that are
necessary. One of the roles needed is architect.
You need to estimate how many architect hours are required to complete the work. What should
you do?
A. Add a Material Resource named architect.
B. Add a Budget Resource named architect.
C. Add a Work Resource named architect,
D. Add a Cost Resource named architect.
Answer: C

Microsoft   074-343   certification 074-343

NO.13 You are a project manager for a software development company. You use Project Professional
2013.
You manage an integration project, and you discover that you need to add additional resources to
the integration tasks in order to meet your development complete milestone date.
The project is behind schedule, so you must shorten the duration of the integration development
work.
You identify two additional resources to work on the integration task.
When you add these resources, your task now shows it will complete three days ahead of schedule,
which leaves a contingency window for issues that may arise. In order to shorten the duration of the
task when the resources are added, you need to set the task type before adding the resources.
What should you do?
A. Use an automatically scheduled task and set the task type to fixed duration.
B. Use a manually scheduled task and set the task type to fixed work.
C. Use an automatically scheduled task and set the task type to fixed work.
D. Use a manually scheduled task and set the task type to fixed duration.
Answer: C

Microsoft   074-343   074-343   074-343 examen   074-343

NO.14 You are a program manager who uses Project Professional 2013. You manage a portfolio of
projects for a large point of sale implementation. All of your project managers have created
individual project schedules. You discover that you have resource constraints since multiple
resources are working on multiple projects. You need visibility into resources across all projects so
that you can most efficiently manage the resources and their availability. What should you do?
A. Create a shared resource pool and send the location to each project manager. Open the
individual project and the resource pool. From the individual project, select Resource Pool, Share
Resources, and choose Use Resources.
B. Create a shared resource pool and send the location to each Project Manager. Open the
individual project, select Resource Pool, Share Resources, and choose Use Resources.
C. Create a master resource list and send it to each project manager. Open the individual project and
copy and paste it into the Resource Sheet.
D. Create a master resource list and send it to each project manager. Open the individual project,
select Team Planner, and add the resources.
Answer: A

certification Microsoft   074-343 examen   074-343 examen   certification 074-343

NO.15 You are managing a project using Project Professional 2013.
Your project schedule is showing task overallocation indicators in the Gantt chart view.
You navigate to the Team Planner view to investigate more details regarding the over allocations.
You discover that the BA1 resource is overallocated and you need to see all assignments with details
for BA1 to understand their current workload before making any assignment changes. What should
you do?
A. Click the BA1 resource and scroll to the end of the project.
B. Click View, check Details, select Resource Form then click on the BA1 resource.
C. Click View, check Details, select Task Form then click on the BA1 resource.
D. Right-click the BA1 resource and select Information.
Answer: B

Microsoft   074-343   074-343 examen

Pass4Test est un seul site de provider le guide d'étude Microsoft 074-343 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft 074-343 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Les meilleures Microsoft 74-344 examen pratique questions et réponses

Pour réussir le test Microsoft 74-344 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 74-344. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 74-344 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 74-344. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Pass4Test est un seul site de provider le guide d'étude Microsoft 74-344 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft 74-344 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Code d'Examen: 74-344
Nom d'Examen: Microsoft (Managing Programs and Projects with Project Server 2013)
Questions et réponses: 97 Q&As

Dépenser assez de temps et d'argent pour réussir le test Microsoft 74-344 ne peut pas vous assurer à passer le test Microsoft 74-344 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

74-344 Démo gratuit à télécharger: http://www.pass4test.fr/74-344.html

NO.1 You are a program manager for an organization that uses Project Server 2013.
You are responsible for implementing a data warehouse that compiles relational data from many
business areas. Your project managers need to be able to manage the implementation for a
business area as separate projects, while still recognizing the dependencies at a program level.
You need to maintain ownership and authority of key program dates at the program level.
What should you do?
A. Create one project file for all project managers that includes the program-level tasks and each
sub-project's tasks. Require each area project manager to share the file, and add their dependencies
within their own tasks.
B. Create and publish a master project file with general durations for each business area sub-project,
and have the area project manager reconcile the dates in their own project manually each week.
C. Have the project managers create, save, and publish sub-projects for each area. Then insert them
into a program-level project, define dependencies, and save and publish the program-level project
to the server.
D. Create a master project and insert your projects, but never publish the file on the server.
Answer: C

Microsoft examen   74-344   certification 74-344   74-344

NO.2 Your organization is performing a Portfolio Analysis in Project Server 2013.
You want to create a consolidated Portfolio Analysis optimization based on Cost and Resource data,
which will be part of the project information in Project Server 2013.
You plan to provide different simulations to your organization by using those parameters and
returning the best prioritization.
This organization has two different unit directors, who have the final decision on the consolidated
Portfolio Analysis results.
You need to provide the ability for your unit directors to modify the final portfolio selection.
Which element should you use?
A. Resource Requirements
B. Project/Proposal Priority
C. Field Cost Constraint
D. Project Original Start
E. Field Force In/Out
Answer: E

Microsoft examen   certification 74-344   74-344   74-344 examen   certification 74-344

NO.3 A company deploys Project Server 2013 to perform a Portfolio Analysis, which they will use to
select the projects they will execute in the next fiscal period.
The company establishes the criteria to evaluate the portfolio components, and all business cases
must be evaluated under these parameters. When configuring Project Server 2013, the Project
Management Office (PMO) finds that the established criteria contain both qualitative and
quantitative elements, such as corporate reputation and internal rate of return (IRR).
You need to provide a system calculated approach to rank your strategic initiatives against each
other. Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Create a Business Driver library that captures the criteria in quantifiable impact statements that
are specific and measurable.
B. Perform a pairwise analysis on the driver set to identify relative priorities.
C. Perform a prioritization by assigning a relative weight to each value criterion and establish the
priorities.
D. Create a custom field for each criterion and ensure each value is captured for each project by
making the project fields as required.
Answer: A,B

Microsoft   74-344   74-344   certification 74-344

NO.4 Your organization has implemented Project Server 2013 to plan and control enterprise projects.
Your organization plans to perform a Portfolio Analysis for the first time on the Selection of Projects
to be done the next year. Business drivers, as well as a pair wise comparison of those business
drivers to set the business priorities, is the chosen method.
Your organization has provided you with a total of 35 business drivers, 30 of which are related in
some way.
You need to return with a valid set of drivers and prioritization to perform the analysis.
What should you do?
A. Perform a pairwise analysis on the drivers to identify relative priorities with key stakeholders.
B. Specify a priority value for each driver in order to complete the pairwise analysis.
C. Reduce the number of drivers to fewer than 12 and perform the prioritization with the key
stakeholders.
D. Assign priorities to each driver and normalize to 100 percent.
Answer: C

Microsoft   74-344   certification 74-344   74-344

NO.5 Your work in a multinational corporation which uses Project Server 2013 to plan and control
projects in different business units. Each business unit has its own portfolio of projects but can
participate in strategic projects. The Project Management Office (PMO) has configured
Enterprise Project Types (EPTs) to create new products, launch marketing campaigns, and deploy
new lines of business tools to comply with the governance processes.
One of your roles is to identify new products. A local team in Singapore produces an effective idea
for a new product.
You need to create a business case for the next portfolio analysis. You need to gather general
information about the new product by efficiently collaborating with the local team.
What should you do?
A. Start a Project with the New Product EPT, which will trigger a workflow and allow you to display
and collect descriptive data and exchange information in the Project site.
B. Exchange information by sharing documents through SkyDrive Pro 2013.
C. Create a Team Site for the Singapore business unit for gathering information and assigning tasks.
Save the Team Site as a template for use within the New Product EPT.
D. Start a new enterprise project with the Microsoft SharePoint task list EPT, and grant immediate
access to the team so they can share information, assign tasks, and collaborate.
Answer: A

Microsoft   74-344 examen   74-344   74-344   certification 74-344

NO.6 Your organization is a multinational corporation that uses Project Online to plan and control
the projects in different business units. Each business unit has its own portfolio of projects but can
participate in strategic projects.
The Research and Development (R&D) department has been struggling to gather and materialize
the new ideas. The Project Management Office (PMO) has the necessary templates and Enterprise
Project Types (EPTs) to start a formal process for any new product and to adhere to the general
guidelines. However, the R&D group does not want to register all of their ideas since many are
related to improvements and few of them could be materialized into projects.
You need to generate a solution that allows R&D to gather their ideas and facilitate the
materialization into Enterprise Projects.
What should you do?
A. Create a new EPT for the SharePoint Task List and name it R&D New Idea.
B. Within the same site collection of Project Web App (PWA), create a Custom SharePoint Item List
for ideation and requests with custom fields that easily match with Project custom fields when using
the Add SharePoint Sites command in Project Center.
C. Create a new EPT for Enterprise Projects and name it R&D New Idea.
D. Within the same site collection of Project Web App (PWA), create a custom list for ideation and
match list columns with Project custom fields when using the Create Projects command in the
SharePoint Item List.
Answer: D

Microsoft examen   certification 74-344   74-344   74-344   74-344

NO.7 Your organization uses Project Online for project portfolio selection. The business drivers and
priorities are set, as are the main constraints to identify the efficient frontier.
The company has been collecting business cases for new proposals in which many projects may
solve the same business need. For example, the selection for a Customer Relationship Management
system has six different proposals, whereas only one is necessary to fulfill the business need.
You need to guarantee that the analysis will produce the most viable proposal in terms of cost and
resources and that no repetitive efforts exist in the portfolio selection.
What should you do?
A. Create a mutual exclusion dependency among all these projects.
B. Create a mutual inclusion dependency among all these projects.
C. Exclude these projects from the Portfolio Analysis to prevent a deviation from the main goal.
D. Exclude the related projects from the portfolio after the cost analysis with the Force in/out option.
Answer: A

Microsoft   74-344   certification 74-344

NO.8 You are a manager for a project your team has been working on for many weeks. Your project
is created as a Microsoft SharePoint task list project and is available in Project Center.
You have established the work breakdown structure (WBS), predecessors, assignments, and all of
the functionalities you can get from a SharePoint task list. However, the project has grown in detail,
and managing 200 activities has become difficult in Project Web App (PWA).
You need to ensure resources continue to report their progress in the same way.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Activate the Enterprise Project Features for the SharePoint site task list and edit the tasks in PWA
project details.
B. Edit the project in Project Professional 2013 from the Project Center by clicking the icon of the
SharePoint task list project in the Indicators column.
C. Activate the Enterprise Project Features for the SharePoint site task list and edit the tasks in
Project Professional 2013.
D. Edit the project in Project Professional 2013 by synching the SharePoint task list so you can take
advantage of the extended features.
Answer: B,D

Microsoft   74-344 examen   74-344   certification 74-344

NO.9 You are a project manager in an organization that uses Project Server 2013.
All project managers have permission to edit all projects.
You edit a project in Project Web App (PWA), make changes, publish the project, and close your
browser.
A project manager calls you to report they are unable to open your project for edit in PWA. You
need to resolve this issue. What should you do?
A. Advise the project manager to open the project in Project Professional 2013.
B. Open Project Professional 2013 and use the Clean Up Cache button.
C. Open the Project Center in PWA and use the Check in My Projects button.
D. Open the Project Center in PWA and use the Project Permissions button.
Answer: C

Microsoft   74-344 examen   certification 74-344   74-344 examen   74-344 examen

NO.10 You are a program manager for a company that uses Project Server 2013 and Project
Professional 2013. You manage the implementation of a data warehouse.
You have set up your program master project with subprojects for each implementation area.
You need to make edits to the dependencies between projects.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. View the subproject in Project Web App (PWA) and choose Edit. Then add your dependencies in
the predecessor's/successor's column.
B. Open the program-level project from Project Web App (PWA) by using Project Professional 2013.
Highlight the tasks you wish to link for a dependency with the control key. Then click the link button
on the tool bar.
C. Open the program-level project and the subproject from the Project Web App (PWA) and save
them to your local machine. Then add your predecessor's/successor's column in either file.
D. Open each of the required subprojects from the Project Web App (PWA) by using Project
Professional 2013 and create the link in the predecessor's/successor's column to the other projects
using the <>\Project Name\Task ID.
E. View the program-level project in Project Web App (PWA) and choose Edit. Then add your
dependencies in the predecessor's/ successor's column using the <>\Project Name\Task ID.
Answer: B,D

Microsoft examen   74-344   74-344   certification 74-344

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 74-344 juste avec la Q&A de Microsoft 74-344 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.