CTAL-TM_001 est un test de ISQI Certification, donc réussir CTAL-TM_001 est le premier pas à mettre le pied sur la Certifiction ISQI. Ça peut expliquer certiainement pourquoi le test ISQI CTAL-TM_001 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test CTAL-TM_001. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test ISQI CTAL-TM_001 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Le test certification ISQI CTAL-TM_001 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat ISQI CTAL-TM_001 puisse augmenter la compétition dans ce marché.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Code d'Examen: CTAL-TM_001
Nom d'Examen: ISQI (ISTQB Certified Tester Advanced Level - Test Manager)
Questions et réponses: 65 Q&As
Si vous êtes intéressé par l'outil formation ISQI CTAL-TM_001 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.
CTAL-TM_001 Démo gratuit à télécharger: http://www.pass4test.fr/CTAL-TM_001.html
NO.1 Consider the typical objectives of testing. Which of the following metrics can be used to
measure the
effectiveness of the testing process in achieving one of those objectives? 1 credit
A. Average number of days between defect discovery and resolution
B. Percentage of requirements covered
C. Lines of code written per developer per day
D. Percentage of test effort spent on regression testing
Answer: B
ISQI certification CTAL-TM_001 CTAL-TM_001 certification CTAL-TM_001 certification CTAL-TM_001
NO.2 As part of the improvement program, the organization is also looking at tool support.
Which type of tool
could be used to ensure higher quality of the code to be reviewed? 1 credit
A. Review tool
B. Test execution tool
C. Static analysis tool
D. Test design tool
Answer: C
ISQI CTAL-TM_001 CTAL-TM_001 certification CTAL-TM_001
NO.3 You have been given responsibility for the non-functional testing of a safety-critical
monitoring &
diagnostics package in the medical area. Which of the following would you least expect to
see addressed
in the test plan? 1 credit
A. Availability
B. Safety
C. Portability
D. Reliability
Answer: C
ISQI certification CTAL-TM_001 certification CTAL-TM_001 CTAL-TM_001
NO.4 You are about to release a test progress report to a senior manager, who is not a test
specialist. Which
of the following topics should NOT be included in the test progress report? 1 credit
A. Product risks which have been mitigated and those which are outstanding.
B. Recommendations for taking controlling actions
C. Status compared against the started exit criteria
D. Detailed overview of the risk-based test approach being used to ensure the exit criteria to
be achieved
Answer: D
ISQI examen CTAL-TM_001 CTAL-TM_001 CTAL-TM_001
NO.5 What is the main reason why reviews are especially beneficial in the above-mentioned
scenario? 2
credits
A. They ensure a common understanding of the product.
B. They find defects early.
C. They enhance project communication.
D. They can be performed without exercising the code.
Answer: D
ISQI CTAL-TM_001 CTAL-TM_001 CTAL-TM_001 CTAL-TM_001
NO.6 Identify the THREE types of formal peer reviews that can be recognized. 1 credit
A. Inspection
B. Management review
C. Walkthrough
D. Audit
E. Technical review
F. Informal review
G. Assessment
Answer: A,C,E
ISQI CTAL-TM_001 CTAL-TM_001 examen CTAL-TM_001
NO.7 Since the system is in the medical domain and therefore in the safety critical area,
testing needs to be
rigorous and evidence is required that the system has been adequately tested. Identify
THREE measures
that would typically be part of the test approach in this domain and which are not always
applicable in
other domains! 1 credit
A. High level of documentation
B. Failure Mode and Effect Analysis (FMEA) sessions
C. Traceability to requirements
D. Non-functional testing
E. Master test planning
F. Test design techniques
G. Reviews
Answer: A,B,C
ISQI examen CTAL-TM_001 CTAL-TM_001 examen
NO.8 A test log is one of the documents that need to be produced in this domain in order to
provide evidence
of testing. However, the level of detail of test logs can vary. Which of the following is NOT an
influencing
factor for the level of detail of the test logs being produced? 1 credit
A. Level of test execution automation
B. Test level
C. Regulatory requirements
D. Experience level of testers
Answer: D
certification ISQI CTAL-TM_001 CTAL-TM_001 certification CTAL-TM_001
NO.9 Explain how the above mentioned report may differ from a report that you produce for
the project
manager, who is a test specialist Select TWO items from the following options that can be
used to report
to the project manager and would not be included in a report to senior management. 1 credit
A. Show details on effort spent
B. List of all outstanding defects with their priority and severity
C. Give product risk status
D. Show trend analysis
E. State recommendations for release
Answer: A,B
certification ISQI certification CTAL-TM_001 certification CTAL-TM_001
NO.10 Considerable attention will be given in this project to defining exit criteria and on
reporting back on their
status. Which combination of TWO exit criteria from the list would be best to use? 1 credit
I. Total number of defects found
II. Percentage of test cases executed
III. Total test effort planned versus total actual test effort spent
IV. Defect trend (number of defects found per test run over time
A. (i) and (ii)
B. (i) and (iv)
C. (ii) and (iii)
D. (ii) and (iv)
Answer: D
certification ISQI CTAL-TM_001 CTAL-TM_001 certification CTAL-TM_001 CTAL-TM_001 examen CTAL-TM_001
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification ISQI CTAL-TM_001 via son guide d'étude. Est-ce que vous vous souciez de test Certification ISQI CTAL-TM_001? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
没有评论:
发表评论