Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Network Appliance NS0-502 à se preuver. Mais le taux du succès et bien bas. Participer le test Network Appliance NS0-502 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Pass4Test vous promet de vous aider à passer le test Network Appliance NS0-502, vous pouvez télécharger maintenant les Q&As partielles de test Network Appliance NS0-502 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Code d'Examen: NS0-502
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
Questions et réponses: 106 Q&As
Choisir le Pass4Test peut vous aider à réussir 100% le test Network Appliance NS0-502 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
NS0-502 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-502.html
NO.1 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance NS0-502 examen NS0-502 examen NS0-502 examen
NO.2 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B
Network Appliance examen NS0-502 NS0-502
NO.3 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B
Network Appliance certification NS0-502 certification NS0-502 NS0-502
NO.4 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D
Network Appliance NS0-502 certification NS0-502
NO.5 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D
Network Appliance certification NS0-502 NS0-502 examen certification NS0-502 NS0-502
NO.6 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B
certification Network Appliance NS0-502 examen NS0-502 NS0-502 NS0-502
NO.7 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B
Network Appliance certification NS0-502 certification NS0-502
NO.8 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B
Network Appliance examen NS0-502 NS0-502
NO.9 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C
Network Appliance examen NS0-502 certification NS0-502 NS0-502 NS0-502 examen
NO.10 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD
Network Appliance examen NS0-502 NS0-502 NS0-502
NO.11 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B
certification Network Appliance NS0-502 certification NS0-502 NS0-502 NS0-502 examen
NO.12 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D
Network Appliance certification NS0-502 NS0-502 examen
NO.13 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B
Network Appliance examen NS0-502 examen NS0-502 examen certification NS0-502 NS0-502
NO.14 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A
Network Appliance NS0-502 examen NS0-502 examen
NO.15 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D
Network Appliance examen NS0-502 certification NS0-502 certification NS0-502
NO.16 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D
Network Appliance examen certification NS0-502 NS0-502
NO.17 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C
certification Network Appliance NS0-502 NS0-502 examen certification NS0-502 NS0-502
NO.18 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance NS0-502 certification NS0-502 certification NS0-502
NO.19 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A
Network Appliance NS0-502 certification NS0-502 NS0-502 certification NS0-502 NS0-502 examen
NO.20 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD
Network Appliance NS0-502 examen NS0-502 examen NS0-502
Le test Network Appliance NS0-502 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Network Appliance NS0-502 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Network Appliance NS0-502.
没有评论:
发表评论