Pass4Test offre une formation sur Microsoft MB7-841 070-562 70-516-CSHARP matériaux examen

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Microsoft MB7-841. Votre argent sera tout rendu si vous échouez le test.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 070-562, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 070-562 coûtant un peu d'argent.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 070-562. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Code d'Examen: MB7-841
Nom d'Examen: Microsoft (NAV 2009 C/SIDE Solution Development)
Questions et réponses: 95 Q&As

Code d'Examen: 070-562
Nom d'Examen: Microsoft (TS: Microsoft .NET Framework 3.5, ASP.NET Application Development)
Questions et réponses: 133 Q&As

Code d'Examen: 70-516-CSHARP
Nom d'Examen: Microsoft (TS: Accessing Data with Microsoft .NET Framework 4)
Questions et réponses: 142 Q&As

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft MB7-841 en visant le test Microsoft MB7-841. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft MB7-841 sans aucune doute.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Microsoft 070-562. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 070-562, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Microsoft MB7-841. Ajoutez la Q&A au panier.

070-562 Démo gratuit à télécharger: http://www.pass4test.fr/070-562.html

NO.1 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B

certification Microsoft   certification 070-562   070-562 examen   070-562 examen
Exam : 70-562
Title :
Version : Demo
TS: Microsoft .NET
Framework 3.5, ASP.NET
Application Development
1.You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B

Microsoft examen   certification 070-562   certification 070-562   070-562 examen   070-562 examen
2.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C

Microsoft   certification 070-562   070-562 examen   070-562 examen
3.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A

Microsoft examen   070-562 examen   certification 070-562   070-562 examen   070-562
4.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D

certification Microsoft   070-562 examen   070-562 examen   certification 070-562   certification 070-562
5.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B

Microsoft   certification 070-562   certification 070-562   certification 070-562   070-562 examen
6.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C

Microsoft examen   070-562 examen   070-562 examen
7.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B

Microsoft examen   certification 070-562   070-562 examen   070-562 examen   070-562 examen
8.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A

Microsoft   070-562 examen   certification 070-562   070-562 examen   070-562 examen
9.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C

Microsoft examen   070-562 examen   certification 070-562   certification 070-562   070-562   070-562 examen
10.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D

Microsoft   070-562 examen   070-562 examen   certification 070-562   070-562   070-562 examen
11.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C

certification Microsoft   certification 070-562   070-562 examen   070-562   070-562 examen
12.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C

Microsoft examen   070-562   070-562 examen   certification 070-562
13.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D

Microsoft examen   070-562 examen   certification 070-562   certification 070-562
14.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B

certification Microsoft   certification 070-562   070-562 examen   certification 070-562   certification 070-562   070-562 examen
15.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A

certification Microsoft   070-562 examen   070-562 examen   certification 070-562
16.You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A

certification Microsoft   070-562   070-562
17.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A

Microsoft   certification 070-562   070-562 examen   certification 070-562
18.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A

certification Microsoft   070-562 examen   certification 070-562   certification 070-562   070-562   070-562 examen
19.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF

Microsoft examen   070-562 examen   certification 070-562   certification 070-562
20.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B

certification Microsoft   certification 070-562   certification 070-562   certification 070-562

NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C

certification Microsoft   070-562 examen   certification 070-562   070-562 examen   070-562 examen

NO.3 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C

Microsoft examen   070-562 examen   070-562 examen   070-562 examen   070-562

NO.4 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A

certification Microsoft   certification 070-562   certification 070-562

NO.5 You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B

certification Microsoft   certification 070-562   certification 070-562

NO.6 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C

certification Microsoft   070-562   070-562 examen   certification 070-562   certification 070-562   certification 070-562

NO.7 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D

certification Microsoft   070-562   070-562 examen   070-562   certification 070-562

NO.8 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A

certification Microsoft   certification 070-562   070-562   070-562 examen   070-562 examen

Microsoft MB7-841 examen pratique questions et réponses

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft MB7-841.

Le test Microsoft MB7-841 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Microsoft MB7-841. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Code d'Examen: MB7-841
Nom d'Examen: Microsoft (NAV 2009 C/SIDE Solution Development)
Questions et réponses: 95 Q&As

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Microsoft MB7-841, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Microsoft MB7-841 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Microsoft MB7-841 sans aucune doute.

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

MB7-841 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-841.html

NO.1 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. There is a colleague who is named John in the company. From the options
below, he is asked to identify C/SIDE standards for a Check Line codeunit. But he is not clear about it.
Since you are the technical support, he asks for your answer. So what is your answer? (choose more than
one)
A.It is called from both Post Batch and Post Line.
B.It writes to the Register table to track posting statistics.
C.It calls the Post Line function to write the record after it is checked.
D.After the first call, it has no interaction with the server.
Answer:A D

certification Microsoft   MB7-841   MB7-841 examen   MB7-841 examen

NO.2 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. You are appointed to work with a client of your company. Now you are asked to
create a custom report which groups Customers by Sales representative. Of the following options, which
is the reason for applying grouping in a Microsoft Dynamics NAV 2009 report? (choose more than one)
A.It is for causing the report to print a sub-heading each time the salesperson code changes when printing
a list of customers.
B.It is for allowing the user to filter the report on the date of the transactions.
C.It is for causing the report to print a new page for each salesperson when printing a list of customers.
D.It is for causing two or more customer reports to print simultaneously for each salesperson.
Answer:A C

Microsoft examen   MB7-841   MB7-841 examen   certification MB7-841

NO.3 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. Another programmer has written a report. But it is not producing any output.
Therefore, your company asks you to find out the reason. So what may cause this?
A.The request form was not used.
B.Calcsums was not called in the OnAfterGetRecord trigger.
C.The report has been filtered with code so that no records match the filter(s).
D.The PrintOnlyIfDetail property has been set to true on the outermost indented DataItem.
Answer:D

Microsoft   MB7-841 examen   MB7-841 examen

NO.4 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. According to company requirement, you have created a Rental Equipment
add-on. This add-on needs a Card page for the master table. In Microsoft Dynamics NAV, most Card
pages have FactBoxes attached to them. Do you know the reason?
A.It is for using in the place of a CardPart so that the data is displayed more clearly to the user.
B.It is for making sure that all validation routines are located in the same place and run as the data is
entered.
C.It is for enabling you to make adjustments to transaction information after it is posted.
D.It is for viewing additional information associated with a selected entity in the primary page.
Answer:D

Microsoft examen   MB7-841   MB7-841 examen   certification MB7-841

NO.5 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a colleague who is named John in the company. From the options
below, he is asked to identify the one that is a use for FlowFields in Microsoft Dynamics NAV 2009. But he
is not clear about the answer. Since you are the IT professional, he asks for your answer. So what should
you reply to him?
A.Calculate time between events.
B.Modify the sign of data in a table
C.Write replacement records to a Master table.
D.Lookup information in a related table.
Answer:D

Microsoft   MB7-841 examen   MB7-841 examen   MB7-841

NO.6 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a page object. A number of familiar methods are exposed when the
page object is published as a Web service. Do you know which of the following belongs to the methods?
A.One of the methods is OnOpenPage
B.One of the methods is READ.
C.One of the methods is VALIDATE
D.One of the methods is OnAfterGetRecord
Answer:B

certification Microsoft   MB7-841   MB7-841

NO.7 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. An export XMLPort has been created by you. Now you are asked to run this
export XMLPort. Of the following options, which one is required to be instantiated to process the XMLPort?
(choose more than one)
A.The XMLPort is required to be instantiated to process the XMLPort.
B.A MESSAGE function is required to be instantiated to process the XMLPort.
C.A file to receive the data is required to be instantiated to process the XMLPort.
D.An OUTSTREAM object is required to be instantiated to process the XMLPort.
Answer:A C D

Microsoft   MB7-841   certification MB7-841   MB7-841 examen   MB7-841 examen

NO.8 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. At present you are working on a project with your working team. You work as
the programmer for the part of data conversion. Of the following methods, which can be used to convert
the current customer balances? (this area is complete and the data has been tested)
A.An XMLPort should be written to have the data imported into the Gen. Journal Line table.
B.After an XMLPort is written to have the data imported into a Gen. Journal Line record, call the Gen.
Jnl.-Post Line code unit by using it.
C.After an XMLPort is written to have the data imported into a Gen. Journal Line record, call the Gen.
Jnl.-Check Line code unit by using it.
D.After an XMLPort is written to have the data imported into the Gen. Ledger Entry table, call the
appropriate posting routing to validate the data.
Answer:B

Microsoft   certification MB7-841   MB7-841 examen

NO.9 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. You have created an XMLPort. You want to run the XMLPort to export a list
of customers for sales representative in C/SIDE. Besides the XMLPort, which do you need to instantiate
to process the XMLPort?
A.A READSTREAM object
B.A MESSAGE object
C.An OUTSTREAM object
D.An INSTREAM object
Answer:C

certification Microsoft   MB7-841   MB7-841 examen   certification MB7-841

NO.10 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. Now you are modifying a function in a standard C/SIDE codeunit. The
function has a record variable passed to it by reference and is usually called from a report. In order to
check the filters that the user may have applied to the record variable, you need to have code added to
the function to perform this. Is this possible to do this? Why?
A.It is impossible since it is passed by reference and the information passed does not include filters.
B.It is impossible, the report keeps the set of records the user selected unless the variable is passed by
value.
C.It is possible, even though the record variable only gives you access to one record, there is a system
variable which contains all filters that the user has applied.
D.It is possible since the record variable represents a set of records from the associated table including
the filters and key.
Answer:D

Microsoft   MB7-841   MB7-841

NO.11 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. In order to look at detail information in the Ledger table, a FlowField has
been designed in a Master table. Someone asked you to have a FlowFilter field added to the table as well.
Do you know what is a FlowFilter field used for?
A.It is used to filter the form view of the FlowField in the Microsoft SQL Server only.
B.It is used to limit write access to data in the FlowField detail table.
C.It is used to include in the CalcFormula of a FlowField, which will permit programmer- defined filters to
modify the SumIndexFields during the FlowField calculation.
D.It is used to include in the CalcFormula of a FlowField, which will permit user- defined filters to be
applied in the Flow Field calculation.
Answer:C

Microsoft   MB7-841   certification MB7-841   MB7-841

NO.12 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. The company assigns a task to you. You have to train the users to use the
C/SIDE report writer to write reports. Of the following options, which describes correctly that you can use
of the OnInitReport trigger in a report?
A.The Request Form has not been processed.
B.Data from Data Item tables can be accessed.
C.The OnPreReport trigger can be called from a single instance codeunit.
D.You cannot call a private function cannot be called in the same report object.
Answer:A

certification Microsoft   MB7-841   certification MB7-841   certification MB7-841

NO.13 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a colleague who is named John in the company. He wants to know why
it is a good idea to have a separate codeunit created for code that uses automation. (choose more than
one)
A.It is because an object using automation can only be compiled on a machine on which the automation
server is installed.
B.It is because of better performance.
C.It is because processing of records on the client machine will be enhanced.
D.It is because the automation type cannot be exported across the network.
Answer:A B

Microsoft examen   MB7-841 examen   MB7-841 examen   MB7-841

NO.14 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. A code has been written by you. For the Customer table which is called
Customer, a record variable is created by you. Now you are asked to identify which Customers reside in
one of the regions that supported by your company, hence you intend to loop through the table. Now you
are using a record variable which is to be filtered, before the record variable is filtered, what function do
you called?
A.Customer.FINDSET()
B.Customer.SETRANGE()
C.Customer.SETCURRENTKEY()
D.Customer.SETPERMISSIONFILTER
Answer:C

certification Microsoft   MB7-841   MB7-841 examen   MB7-841

NO.15 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a colleague who is named John in the company. He does not know the
reason of using a Virtual table in Microsoft Dynamics NAV 2009. Since you are the IT professional, he
asks for your answer. So what should you reply to him?
A.As a Dataitem in a report.
B.To store global information from C/AL variables.
C.To maintain current user statistics.
D.To know when to use the COMMIT statement.
Answer:A

Microsoft   MB7-841   MB7-841   certification MB7-841

NO.16 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. As you know, either the Classic Database Server or SQL Server can be used
by Microsoft Dynamics NAV 2009. You know how the Classic Database Server implements keys. Do you
know how key(indexes) are implemented in SQL Server?(choose more than one)
A.Non-unique indexes are forbidden.
B.The primary key index is clustered by default.
C.A table is required to have a clustered index.
D.The remainder of the primary key is added to every secondary index, making the indexes unique.
Answer:B D

Microsoft   MB7-841   certification MB7-841

NO.17 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a colleague who is named John in the company. A function is created in
a codeunit by him. He chose VAR when he sets up a parameter. But he is not clear about its meaning.
Since you are the IT professional, he asks for your answer. So what do you reply to him?
A.It means that the parameter is a variable while not a text constant.
B.It means that the parameter is passed as a variant.
C.It means that the parameter is passed by reference rather than value.
D.It means that the parameter is passed as a static copy.
Answer:C

Microsoft   MB7-841 examen   MB7-841

NO.18 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. A client of your company wants to know the use of Web services in Microsoft
Dynamics NAV 2009 and the most important reason that you recommend Web services. So what is your
answer?
A.It is because the client has to read data from Microsoft Dynamics NAV 2009.
B.It is because the client has to write data directly to Microsoft Dynamics NAV 2009.
C.It is because the client already has a Web page and a staff to maintain it.
D.It is because the client needs to have the ability of executing business logic within Microsoft Dynamics
NAV 2009 from an external application.
Answer:D

Microsoft   MB7-841   MB7-841   MB7-841

NO.19 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. There is a colleague who is named John in the company. He is asked to
consider the snippet of code below: WITH RentalEquipment DO BEGIN
VALIDATE(Amount,RentalContractLine.Amount); "Late Fee" :=
CalcLateFee(EquipmentRentalContractLine); MODIFY; END; John is asked to describe the purpose of
the VALIDATE statement. But he is not clear about the purpose. Since you are the technical support, he
asks for your answer. So what do you reply to him?
A.The purpose is to decrement the value of the Amount field.
B.The purpose is to run any code in the field's ONValidate trigger.
C.The purpose is to avoid having to use the scope operator when addressing the field.
D.The purpose is to make sure that the RentalContractLine.Amount field is a decimal type.
Answer:B

Microsoft examen   MB7-841   MB7-841

NO.20 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. You are appointed to work with a client of your company. The client wants to
store information outside the standard Microsoft Dynamics NAV 2009 ledger tables. According to the
requirement of the client, you have to create a solution. You have selected a master table and created a
ledger table to support. Your solution must conform to Microsoft Dynamics NAV 2009 posting standards.
Of the following codeunits, which one will have to be created? (choose more than one)
A.Post Batch will have to be created.
B.Check-Line will have to be created.
C.Post Line will have to be created.
D.Sales-Post will have to be created.
Answer:A B C

Microsoft   MB7-841   MB7-841

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft MB7-841 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.