Si vous êtes intéressé par l'outil formation Convergence Technologies Profession TT0-201 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Convergence Technologies Profession TT0-201 est une bonne examination. Mais c'est difficile à passer le test Convergence Technologies Profession TT0-201. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Convergence Technologies Profession TT0-201 sans aucune doute si vous choisissez le Pass4Test.
L'équipe de Pass4Test rehcerche la Q&A de test certification Convergence Technologies Profession TT0-201 en visant le test Convergence Technologies Profession TT0-201. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Convergence Technologies Profession TT0-201 sans aucune doute.
Code d'Examen: TT0-201
Nom d'Examen: Convergence Technologies Profession (Convergence Technologies Professional 2007)
Questions et réponses: 195 Q&As
TT0-201 Démo gratuit à télécharger: http://www.pass4test.fr/TT0-201.html
NO.1 When a technician connects a North American T-1 trunk to a European E-1 trunk using a conversion
device, which of the following will result?
A.No less than 80% of the T-1 can be used.
B.No more than 80% of the E-1 trunk can be used.
C.No connection can be made between E-1 and T-1.
D.The connection will fail, because E-1 uses out-of-band transmission, and T-1 lines use in-band
transmission.
Answer: B
Convergence Technologies Profession TT0-201 certification TT0-201 certification TT0-201
NO.2 Which of the following is most likely to be used to identify a device to be called in a hunt group?
A.A Virtual LAN Identifier (VID).
B.A Secure Set Identifier (SSID) entry.
C.A Canonical Format Indicator (CFI) entry.
D.A Media Access Control (MAC) address.
Answer: D
certification Convergence Technologies Profession certification TT0-201 TT0-201 TT0-201 examen
NO.3 Which of the following best describes what occurs to a protocol data unit as information passes from
layer 1 to layer 7?
A.Each layer reads all remaining protocol data units and adds information specific to that layer.
B. Each layer reads all remaining protocol data units and determines how to route the packet.
C.As data units are passed up the protocol stack, each layer removes information relevant to the function
of that layer.
D.As data units are passed down the protocol stack, each layer adds information appropriate to the
function of that layer.
Answer: C
Convergence Technologies Profession TT0-201 TT0-201
NO.4 Consider the following image of a Media Access Control (MAC) address:QV12116bY$X%&,*+
Which of the following describes the portion designated by letter A?
A.The 48 bit ID code, known as the Mac-48.
B.The 48 bit ID code, known as the EUI-48.
C.The 24 bit vendor code, known as the Organizationally Unique Identifier (OUI)
D.The 64 bit interface serial number, known as the known as the Organizationally Unique Identifier (OUI).
Answer: C
certification Convergence Technologies Profession TT0-201 TT0-201
NO.5 You have been asked to recommend an appropriate network bandwidth for a medium to large business.
This business will use it for their IP phones, as well as their data connection. Which of the following would
you recommend?
A.DS0
B.DS1
C.ISDN BRI
D.ISDN PRI
Answer: D
certification Convergence Technologies Profession certification TT0-201 TT0-201 examen TT0-201 examen
NO.6 Which of the following is the correct ordering of protocol data units, starting from Layer 1 of the
OSI/RM to Layer 7?
A.Packet, data, frame, bits
B.Bits, frame, data, packet
C.Data, segment, packet, frame
D.Frame, packet, segment, data
Answer: D
certification Convergence Technologies Profession certification TT0-201 TT0-201
NO.7 When data is sent down to the Session layer of the OSI/RM the PDU consists of which encapsulated
components?
A.Physical header, Network header, Data
B. Data, Application header, Presentation header
C.Network header, Data Link header, Physical header
D.Application header, Presentation header, Transport header
Answer: B
Convergence Technologies Profession certification TT0-201 certification TT0-201 certification TT0-201
NO.8 Which of the following devices operates at Layer 2 of the OSI/RM and is considered the ideal device
for creating a new broadcast domain for a voice device?
A.Hub
B.Bridge
C.Router
D.Switch
Answer: D
Convergence Technologies Profession certification TT0-201 TT0-201 TT0-201 TT0-201
NO.9 Which of the following is a concern when implementing IPsec for SIP-based voice calls behind a
firewall that implements Network Address Translation (NAT)?
A.IPsec doesn't natively support SIP.
B.Encryption causes increased overhead.
C.You must implement tunnel mode using the AH security protocol.
D.You must implement transport mode using the AH security protocol.
Answer: B
certification Convergence Technologies Profession TT0-201 TT0-201 examen TT0-201 TT0-201 TT0-201 examen
NO.10 In which of the following layers of the OSI/RM would you find the Session Initiation Protocol (SIP)?
A.Network
B.Physical
C.Session
D.Application
Answer: D
Convergence Technologies Profession TT0-201 certification TT0-201 TT0-201 examen
NO.11 Your customer has asked you to enable fax messages to be delivered to her computer so she can read
it in her e-mail. Which protocol should you implement on your convergence device?
A.T.30
B.T.34
C.T.37
D.T.38
Answer: C
certification Convergence Technologies Profession certification TT0-201 TT0-201 examen TT0-201
NO.12 You are helping design an SIP implementation for an existing network. Which of the following is the
most important element to verify?
A.Whether or not the company uses fire-grade cabling.
B.Whether or not the company has implemented QoS.
C.Whether or not the company Web server supports SSL.
D.Whether or not the company layer 2 switches have fault tolerance in place.
Answer: B
certification Convergence Technologies Profession certification TT0-201 TT0-201
NO.13 Which of the following connects the Foreign Exchange Station (FXS) portion of an Analog Telephone
Adapter (ATA) to an analog phone?
A.USB connector.
B.RJ-11 connector.
C.RJ-45 connector.
D.RS-232 connector.
Answer: B
Convergence Technologies Profession TT0-201 TT0-201 certification TT0-201 TT0-201 TT0-201
NO.14 You have implemented DiffServ to describe a collection of service policies that determine how your
network equipment will classify and condition voice data in a traffic flow scheme. What is the accepted
name for this group?
A.Class
B.Group
C.VLAN
D.Domain
Answer: D
Convergence Technologies Profession TT0-201 examen TT0-201 examen TT0-201
NO.15 Which protocol does is generally used to establish calls in SIP implementations?
A.TCP
B.UDP
C.RTP
D.H.225
Answer: B
Convergence Technologies Profession examen TT0-201 examen certification TT0-201 TT0-201 certification TT0-201
NO.16 Which of the following must be used by both an 802.11i Wi-fi card and a IP-enabled PBX network
adapter?
A.A Virtual LAN Identifier (VID).
B.A Secure Set Identifier (SSID) entry.
C.A Media Access Control (MAC) address.
D.A Canonical Format Indicator (CFI) entry.
Answer: C
Convergence Technologies Profession examen TT0-201 examen TT0-201 examen
NO.17 Which of the following describes how the host portion of IPv4 and IPv6 addresses are created?
A.All IPv4 and Ipv6 host addresses are determined by ICANN.
B.All IPv4 and IPv6 host addresses are based on the host's MAC address.
C.The host portion of an IPv4 address is determined by ICANN. The host portion of an IPv6 address is
determined according to the multicast address.
D.The host portion of an IPv4 address is determined arbitrarily according to the value of the subnet mask.
The host portion of an IPv6 address is determined from the host's MAC address.
Answer: D
Convergence Technologies Profession TT0-201 certification TT0-201 TT0-201
NO.18 You have decided to use the following range of IP addresses:
172.16.0.0/24
Which of the following will allow you to avoid deploying NAT traversal workarounds?
A.Deploy a STUN server.
B.Deploy a Session Border Controller (SBC).
C.Use registered IP addresses for all devices.
D.Use the default subnet mask for your IP address range.
Answer: C
certification Convergence Technologies Profession TT0-201 certification TT0-201 TT0-201
NO.19 You have been given the following in CIDR notation: 152.2.100.1/25. How many subnets can you
create, and how many IP addresses can each subnet have?
A.55 subnets, with 1024 addresses per subnet
B.126 subnets, with 512 addresses per subnet
C.128 subnets, with 126 addresses per subnet
D.1024 subnets, with 55 addresses per subnet
Answer: C
Convergence Technologies Profession examen TT0-201 TT0-201 examen certification TT0-201
NO.20 The Session Initiation Protocol (SIP) the ASCII text standard to format its messages. The H.323
protocol uses ASN.1 binary code. Which layer of the OSI/RM is responsible for translating, processing
and reading ASN.1 and ASCII messages?
A.Network
B.Session
C.Physical
D.Presentation
Answer: D
certification Convergence Technologies Profession TT0-201 TT0-201 certification TT0-201 TT0-201
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Convergence Technologies Profession TT0-201, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Convergence Technologies Profession TT0-201. Vous aurez une space plus grande à se développer.
没有评论:
发表评论