Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Symantec ST0-029 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Code d'Examen: ST0-029
Nom d'Examen: Symantec (Symantec Endpoint Protection 11 (STS))
Questions et réponses: 161 Q&As
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Symantec ST0-029, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Symantec ST0-029 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Symantec ST0-029, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Symantec ST0-029. Il n'y a pas de soucis à réussir le test avec une haute note.
ST0-029 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-029.html
NO.1 What is the maximum number of clients that a single Symantec Endpoint Protection Manager can
support?
A. 25,000
B. 50,000
C. 75,000
D. 100,000
Answer: B
Symantec ST0-029 certification ST0-029 ST0-029 examen certification ST0-029
NO.2 How do requirements for installing Symantec Network Access Control relate to installing various
components of Symantec Endpoint Protection 11.0?
A. It does NOT install on any host that is used as either the Symantec Endpoint Protection Manager or a
Group Update Provider.
B. It installs in the same client package as all of the Symantec Endpoint Protection 11.0 components.
C. It does NOT install on any client unless Symantec Endpoint Protection 11.0 is installed.
D. It installs and is automatically enabled when the Network Threat Protection component of Symantec
Endpoint Protection 11.0 is installed on any client.
Answer: B
Symantec examen certification ST0-029 ST0-029 ST0-029 examen ST0-029 examen
NO.3 Which two statements describe the interactions between Symantec Endpoint Protection 11.0 and
Quarantine Server? (Select two.)
A. Clients upload log data and quarantined files to Symantec Endpoint Protection Manager, which
forwards the files to the Quarantine Server.
B. Clients upload log data to Symantec Endpoint Protection Manager and upload quarantined files to
Quarantine Server.
C. Clients upload log data and quarantined files to the Quarantine Server, which forwards the log data to
the Symantec Endpoint Protection Manager.
D. Symantec Endpoint Protection Manager sends quarantine policies, which define the location of the
Quarantine Server, to managed clients.
E. The Quarantine Server sends its location and quarantine policies and rules to all clients.
Answer: BD
Symantec examen certification ST0-029 certification ST0-029 ST0-029
NO.4 Symantec released a new version of Symantec Endpoint Protection client software. An administrator
needs to find out what versions of Symantec Endpoint Protection are currently in the network.
Which report provides this information?
A. Application and Device Control Report
B. System Report
C. Compliance Report
D. Computer Status Report
Answer: D
certification Symantec certification ST0-029 ST0-029 certification ST0-029
NO.5 Which four events trigger an Auto-Protect scan? (Select four.)
A. create
B. open
C. archive
D. move
E. rename
F. run
Answer: ACDF
Symantec ST0-029 examen ST0-029 ST0-029 examen
NO.6 From where does the Migration and Deployment wizadr collect settings?
A. configuration file
B. Symantec Client Firewall Administrator
C. Symantec AntiVirus server
D. Active Directory server
Answer: C
Symantec ST0-029 ST0-029 examen ST0-029 certification ST0-029 certification ST0-029
NO.7 Which two statements are true about Symantec Network Access Control? (Select two.)
A. It is integrated into Symantec Endpoint Protection 11.0, with a shared management console and a
single shared client.
B. It is partially integrated into Symantec Endpoint Protection 11.0, with a shared management console
and compatible clients.
C. It is integrated into and included with Symantec Endpoint Protection 11.0, but requires an additional
license to enable the network access control features.
D. It is on the roadmap to be integrated with Symantec Endpoint Protection 11.0 in a future maintenance
pack release.
E. It is not integrated with Symantec Endpoint Protection 11.0, although both clients may be installed on
any supported host without any operational issues.
Answer: AC
Symantec ST0-029 examen ST0-029 ST0-029
NO.8 What are three features of Symantec Endpoint Protection 11.0? (Select three.)
A. Application Performance Management
B. Client Firewall
C. Application and Device Control
D. Endpoint Change Control
E. Intrusion Prevention
Answer: BCE
certification Symantec ST0-029 examen ST0-029 examen
NO.9 Which two do you need in order to add a Replication Partner? (Select two.)
A. local domain user and password
B. administrator name and password
C. local domain administrator name and password
D. replication server name and port
Answer: BD
Symantec ST0-029 ST0-029
NO.10 On which two operating systems can you install Symantec Endpoint Protection Manager? (Select
two.)
A. Microsoft Windows Vista Ultimate
B. Microsoft Windows NT Server
C. Microsoft Windows XP Professional
D. Microsoft Windows Server 2003
Answer: CD
Symantec certification ST0-029 ST0-029
NO.11 Which failover option is available in Symantec Endpoint Protection?
A. One manager can fail over between two databases in a single site.
B. One client can fail over between two managers in a single site.
C. One manager can fail over to another Group Update Provider.
D. One client can fail over between two databases in separate sites.
Answer: B
Symantec certification ST0-029 ST0-029
NO.12 Which two roles can Symantec Endpoint Protection Manager assign to managed clients? (Select two.)
A. LAN Enforcer
B. Group Update Provider
C. Unmanaged Detector
D. Database Replicator
Answer: BC
Symantec ST0-029 ST0-029 certification ST0-029
NO.13 What is a benefit of Symantec Endpoint Protection 11.0?
A. A single client provides all functions, which reduces the resource usage footprint.
B. Solaris is a supported platform for the client.
C. The number of required management consoles is reduced from five to three, which simplifies
administration compared to previous versions.
D. Proactive Threat Protection runs in real-time.
Answer: A
Symantec ST0-029 certification ST0-029 ST0-029
NO.14 Where can you determine what content updates are available on the Symantec Endpoint Protection
Manager?
A. Home page
B. Monitors page
C. Clients page
D. Admin page
Answer: D
Symantec examen certification ST0-029 certification ST0-029
NO.15 In which group can you NOT create new subgroups?
A. Global
B. Subgroup
C. Temporary
D. Administrator-created
Answer: C
Symantec certification ST0-029 ST0-029 examen ST0-029 examen
NO.16 Which two external databases does Symantec Endpoint Protection Manager support? (Select two.)
A. Microsoft SQL Server 2000
B. MySQL Server 2005
C. Microsoft SQL Server 2005
D. Oracle Database 11g
Answer: AC
certification Symantec ST0-029 ST0-029
NO.17 Which Symantec Network Access Control method supports basic and transparent mode for 802.1x?
A. Gateway Enforcer
B. Self Enforcement
C. DHCP Enforcer
D. LAN Enforcer
Answer: D
certification Symantec ST0-029 ST0-029 examen
NO.18 Upon which convention are custom Symantec Endpoint Protection Intrusion Prevention signatures
based?
A. Generic Exploit Blocking
B. Cisco IDS
C. SNORT
D. Tripwire
Answer: C
certification Symantec ST0-029 ST0-029 ST0-029 ST0-029 ST0-029 examen
NO.19 Which two are characteristics of Proactive Threat Protection? (Select two.)
A. detects unknown threats
B. inspects encrypted network traffic
C. evaluates process behavior
D. blocks attacker's IP address
Answer: AC
Symantec examen ST0-029 ST0-029 ST0-029 examen
NO.20 What is the maximum number of clients that the embedded database can support?
A. 1,000
B. 2,000
C. 3,000
D. 5,000
Answer: A
certification Symantec ST0-029 ST0-029 ST0-029
NO.21 When using the Push Deployment wizadr, which two methods can you use to identify the target
machines to which you want to install the Symantec Endpoint Protection client? (Select two.)
A. browse through Windows Networking
B. import a file containing IP addresses
C. specify a UNC path
D. import a file containing MAC addresses
E. import hostnames from an LDAP server
Answer: AC
certification Symantec ST0-029 examen certification ST0-029
NO.22 What is the relationship of Symantec Network Access Control to Symantec Endpoint Protection 11.0?
A. Symantec Network Access Control is completely integrated with Symantec Endpoint Protection 11.0
and cannot be installed alone.
B. Symantec Network Access Control is a part of Symantec Endpoint Protection 11.0, but is not enabled
unless a separate license is purchased.
C. Symantec Network Access Control is not part of Symantec Endpoint Protection 11.0, but does not
interfere with Symantec Endpoint Protection 11.0 components.
D. Symantec Network Access Control works with Symantec Endpoint Protection 11.0, but uses a different
management console and installation process.
Answer: B
Symantec examen certification ST0-029 ST0-029
NO.23 A company is interested in making sure that their remote VPN users have compliant systems before
joining the corporate network.
Which two Symantec Network Access Control methods are recommended? (Select two.)
A. LAN Enforcer
B. Gateway Enforcer
C. Self Enforcement
D. DHCP Enforcer
Answer: BC
certification Symantec certification ST0-029 ST0-029 ST0-029 certification ST0-029 certification ST0-029
NO.24 Which Symantec Network Access Control Enforcer can be deployed as either a software plug-in or as
an appliance?
A. LAN Enforcer
B. Gateway Enforcer
C. Self Enforcement
D. DHCP Enforcer
Answer: D
Symantec examen ST0-029 ST0-029 ST0-029
NO.25 How many client installation packages are required to install Symantec Endpoint Protection 11.0 with
all available components?
A. one
B. two
C. three
D. four
Answer: A
certification Symantec ST0-029 examen ST0-029
NO.26 How does Symantec Endpoint Protection use Unmanaged Detector to find unmanaged devices on the
network?
A. It compares MAC addresses to a list of known hosts.
B. It receives logon failures notifications from an LDAP server.
C. It pings clients on port 80 to trigger a response from managed clients.
D. It attempts to make http connections with clients in an address range.
Answer: A
Symantec examen ST0-029 ST0-029 certification ST0-029
NO.27 Which parameter is unique to each Symantec Endpoint Protection client?
A. CUID
B. GUID
C. SUID
D. RUID
Answer: B
Symantec certification ST0-029 ST0-029
NO.28 Which two high-level components make up the Symantec Endpoint Protection solution? (Select two.)
A. Symantec Endpoint Protection
B. Symantec Critical System Protection
C. Symantec Security Information Manager
D. Symantec Network Access Control
Answer: AD
Symantec ST0-029 examen certification ST0-029 ST0-029 certification ST0-029
NO.29 Which component must be installed prior to installing Symantec Endpoint Protection Manager?
A. Apache Tomcat Server
B. Microsoft Internet Authentication Server (IAS)
C. Microsoft Internet Information Server (IIS)
D. Sun Java Runtime Environment (JRE)
Answer: C
Symantec ST0-029 examen ST0-029 ST0-029
NO.30 Which statement is true about Symantec Network Access Control 11.0 client administration?
A. The administration console for Symantec Network Access Control 11.0 has been updated to resemble
the Symantec Endpoint Protection Manager console.
B. Symantec Network Access Control 11.0 centralized administration is now provided exclusively through
the Symantec Endpoint Protection Manager console.
C. The administration console for Symantec Network Access Control 11.0 now includes fields and options
that require that Network Threat protection is enabled.
D. Symantec Network Access Control 11.0 can now be administered through either its own console or the
Symantec Endpoint Protection Manager console.
Answer: B
Symantec ST0-029 examen certification ST0-029 ST0-029
Le test Certificat Symantec ST0-029 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Symantec ST0-029. Vous allez prendre toutes essences du test Symantec ST0-029 dans une courte terme.
没有评论:
发表评论