Après une longue attente, les documentations de test Cisco 352-001 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Cisco 352-001 à la première fois.
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
Si vous faites toujours la lutte contre le test Cisco 352-001, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Cisco 352-001. Si vous avez déjà décidé à s'améliorer via Cisco 352-001, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
La population de la Certification Cisco 352-001 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Pass4Test peut vous fournir un raccourci à passer le test Cisco 352-001: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Cisco 352-001. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
Code d'Examen: 352-001
Nom d'Examen: Cisco (ADVDESIGN)
Questions et réponses: 240 Q&As
Pour réussir le test Cisco 352-001 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Cisco 352-001. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Cisco 352-001 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
352-001 Démo gratuit à télécharger: http://www.pass4test.fr/352-001.html
NO.1 Configure routers -RE and -RF as route reflectors of router -RA in this network presented in the
following exhibit. When router -RC transmits a route to router -RA, which router or routers will router -RA
send an update to?
A.only EBGP routers, except router -RC
B.all routers, except router -C
C.only iBGP routers
D.only route reflector clients
Answer:B
certification Cisco 352-001 examen certification 352-001 352-001 examen
NO.2 Which two reasons are valid for aggregating routing information within a network? (Choose two.)
A.to improve optimal routing within the network
B.to reduce the impact of topology changes
C.to reduce the amount of information any specific router within the network must store and process
D.to isolate the impact of DDoS attacks
Answer:B C
Cisco 352-001 certification 352-001 352-001 352-001 examen
NO.3 How many broadcast segments are contained in this network according to the exhibit?
A.1
B.2
C.4
D.5
Answer:B
Cisco certification 352-001 352-001 352-001 352-001 352-001
NO.4 You are the Cisco Network Designer in s.com. In your company site, a NAS is both physically and
logically in the traffic path. The NAS identifies clients solely based on their MAC addresses. In which
access mode has this NAS been configured to operate?
A.Layer 2 mode
B.Layer 2 Edge mode
C.Layer 3 mode
D.Layer 3 In-Band mode
Answer:A
Cisco examen 352-001 examen 352-001 examen certification 352-001 352-001 examen
NO.5 What information can you get from TCP flags while assessing an attack?
A.source of the attack
B.type of attack
C.target of the attack
D.priority of the attack traffic
Answer:B
Cisco certification 352-001 352-001 352-001 certification 352-001 352-001
NO.6 You are a network technician for the Ltd. Study the exhibit carefully. All links provided in the network
are equal cost, and -R1 is configured to use per packet load sharing. One-way latencies for each route
are displayed on the diagram. Which option is true about packets sent from Network A to Network B?
A.Network B may receive out-of-order packets due to excessive latency on the -R4- -R3 link.
B.-R1 will not use -R4 and -R3, because it will detect delayed TCP ACK packets coming from that path.
C.Any out-of-order packets will be buffered and sent in order by CBWFQ, configured on Router -R1.
D.Any out-of-order packets will be buffered and sent in order by CBWFQ, configured on Router -R3.
Answer:A
certification Cisco 352-001 examen 352-001 examen 352-001 examen 352-001 examen
NO.7 What is the way that an OSPF ABR uses to prevent summary route information from being readvertised
from an area into the network core (Area 0)?
A.It advertises only inter-area summaries to the backbone.
B.It uses poison reverse and split horizon.
C.It only sends locally originated summaries to the backbone.
D.It compares the area number on the summary LSA to the local area.
Answer:C
Cisco certification 352-001 352-001 examen
NO.8 All routers in this network are running EIGRP according to the exhibit. Which step is the most important
to make sure that this network core will converge quickly should a link failure occur?
A.make certain the maximum number of paths on both of the routers is two
B.make certain EIGRP is not running across non-transit links
C.add another link between the two routers with no servers and set the metric on this new link equal to the
other four links
D.make certain EIGRP is running across all links
Answer:B
Cisco examen 352-001 certification 352-001 352-001 examen certification 352-001
NO.9 You are the Cisco Network Designer in s.com. Which two characteristics are most typical of a SAN?
(Choose two.)
A.NICs are used for network connectivity.
B.Servers request specific blocks of data.
C.Storage devices are directly connected to servers.
D.A fabric is used as the hardware for connecting servers to storage devices.
Answer:B D
Cisco 352-001 352-001 examen 352-001
NO.10 Which two reasons are correct about building a flooding domain boundary in a link-state network?
(Choose two.)
A.to increase the size of the Shortest Path First tree
B.to aggregate reachability information
C.to provide an administrative boundary between portions of the network
D.to segregate complex and rapidly changing portions of the network from one another
Answer:B D
Cisco 352-001 352-001 examen 352-001 examen
NO.11 Which VPN management feature would be considered to ensure that the network had the least
disruption of service when making topology changes?
A.dynamic reconfiguration
B.path MTU discovery
C.auto setup
D.remote management
Answer:A
certification Cisco 352-001 352-001
NO.12 What is high availability?
A.redundant infrastructure
B.clustering of computer systems
C.reduced MTBF
D.continuous operation of computing systems
Answer:D
Cisco examen 352-001 352-001 352-001 examen 352-001
NO.13 Connecting an IS-IS router to four links and redistributing 75 routes from RIP. How many LSPs will be
originated by this router?
A.one LSP: containing the router information, internal routes, and external routes
B.six LSPs: one for each link, one containing router information, and one containing external routing
information
C.two LSPs: one containing router information and internal routes and one containing external routes
D.three LSPs: one containing all links, one containing router information, and one containing external
routing information
Answer:A
Cisco certification 352-001 352-001 examen 352-001
NO.14 Which three types of LSA could each trigger a partial SPF? (Choose three.)
A.type 2 LSA (Network Link Advertisements)
B.type 3 LSA (ABR Summary Link Advertisements)
C.type 4 LSA (ASBR Summary Link Advertisements)
D.type 5 LSA (Autonomous System External Link Advertisements)
Answer:B C D
Cisco 352-001 examen certification 352-001 certification 352-001
NO.15 In this network presented in the following exhibit, all routers are configured to perform EIGRP on all
interfaces. All interface bandwidths are set to 1000, and the delays are configured as displayed. In the
topology table at router -RC, only one path can be seen towards 10.1.1.0/24. Which description is correct?
A.Router -RB is not advertising 10.1.1.0/24 to router -RC due to a split horizon
B.EIGRP should advertise all available paths to 10.1.1.0/24 in the local topology table to all neighbors so
this condition is a bug
C.Router -RD is not advertising 10.1.1.0/24 to Router -RC due to a split horizon
D.Router -RC should have two paths to 10.1.1.0/24, while routers -RB and -RD should each have only
one path, indicating a route filter has been applied on Router -RC
Answer:C
certification Cisco certification 352-001 352-001 352-001 certification 352-001
NO.16 When designing a converged network, which measures can be taken at the building access layer to
help eliminate latency and ensure end-to-end quality of service can be maintained? (Choose three.)
A.rate limit voice traffic
B.onfigure spanning-tree for fast link convergence
C.isolate voice traffic on separate VLANs
D.classify and mark traffic close to the source
Answer:B C D
Cisco 352-001 examen 352-001 examen certification 352-001 352-001 examen 352-001
NO.17 Lafeyette Productions is looking for a new ISP that has improved availability, load balancing, and
catastrophe protection. Which type of ISP connectivity solution would be best?
A.single run
B.multi-homed
C.stub domain EBGP
D.direct BGP peering
Answer:B
certification Cisco 352-001 352-001 examen 352-001
NO.18 Which IP telephony deployment model uses an H.225 Gatekeeper-Controlled trunk for call admission
control within existing H.323 environments?
A.single site with centralized call processing
B.single site with distributed call processing
C.multisite with centralized call processing
D.multisite with distributed call processing
Answer:D
certification Cisco 352-001 352-001 352-001 352-001 examen
NO.19 Which two steps can be taken by the sinkhole technique? (Choose two.)
A.reverse the direction of an attack
B.redirect an attack away from its target
C.monitor attack noise, scans, and other activity
D.delay an attack from reaching its target
Answer:B C
certification Cisco 352-001 352-001 352-001 certification 352-001
NO.20 You are the Cisco Network Designer in s.com. Which two settings must be configured in order to use
the GUI to configure Call Admission Control with voice applications? (Choose two.)
A.QoS must be set to Silver
B.WMM must be enabled
C.QoS must be set to Gold
D.QoS must be set to Platinum
Answer:B D
Cisco examen certification 352-001 352-001 352-001 352-001
NO.21 According to the network in this exhibit, traffic directed towards 10.1.5.1 arrives at -R4. Which path will
the traffic take from here?
A.It will take -R2.
B.It will not take any path. -R4 will drop the traffic.
C.It will take -R3.
D.It will load share between -R2 and -R3.
Answer:A
Cisco examen 352-001 352-001 352-001
NO.22 The company is deploying OSPF on a point-to-multipoint Frame Relay network. The remote sites
needn??t to communicate with each other and there are a relatively small number of sites (scaling is not a
concern). How to configure OSPF for this topology in order to minimize the additional routing information
injected into the network and keep the configuration size and complexity to a minimum?
A.Configure the link as OSPF nonbroadcast and manually configure each of the remote sites as a
neighbor.
B.Configure the link as OSPF broadcast and configure the hub router to always be the designated router.
C.Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.
D.Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers as OSPF
point-to-point.
Answer:B
Cisco examen 352-001 352-001 352-001 352-001 352-001 examen
NO.23 In the network presented in the following exhibit, all routers are configured to run EIGRP on all links. All
packets transmitted during convergence are transmitted once (there are no dropped or retransmitted
packets). What is the maximum number of queries -R3 might receive for 192.168.1.0/24 if the link
between -R1 and -R2 fails?
A.four queries, one each from -R2, -R4, -R5, and -R6
B.no queries, because there aren't any alternate paths for 192.168.1.0/24
C.seven queries, one from -R2 and two each from -R4, -R5, and -R6
D.one query, since the remote routers -R4, -R5, and -R6 are natural stubs in EIGRP
Answer:A
Cisco examen certification 352-001 352-001 352-001 examen
NO.24 In the network presented in the following exhibit, all routers are configured to perform EIGRP on all
interfaces. All interface bandwidths are set to 1000, and the delays are configured as displayed. In the
topology table at Router -RC, you see only one path towards 10.1.1.0/24. Why Router -RC only has one
path in its topology table?
A.Router -RB is not advertising 10.1.1.0/24 to Router -RC due to split horizon.
B.Router -RD is not advertising 10.1.1.0/24 to Router -RC because Router -RC is its feasible successor.
C.Router -RD is not advertising 10.1.1.0/24 to Router -RC due to split horizon.
D.Router -RB is not advertising 10.1.1.0/24 to Router -RC because Router -RC is its feasible successor.
Answer:C
Cisco examen 352-001 examen 352-001 352-001
NO.25 The IGP next-hop reachability for a BGP route is lost but a default route is available. Assuming that BGP
connectivity is maintained, what will happen to the BGP route?
A.It will be put in a hold-down state by BGP until the next hop has been updated.
B.It will be removed from the BGP table.
C.It will be considered a valid route.
D.It will be considered invalid for traffic forwarding.
Answer:C
Cisco examen certification 352-001 certification 352-001 352-001 352-001 certification 352-001
NO.26 You are a network technician for the company, study the exhibit carefully. -R1 is redistributing
10.1.5.0/24 into Area 1 in this network. Which LSA containing 10.1.5.0/24 will -R6 have in its database?
A.-R6 will have a border router (type 4) LSA in its local database for 10.1.5.0/24.
B.-R6 will have an NSSA external (type 7) LSA in its local database for 10.1.5.0/24.
C.-R6 will have an external (type 5) LSA for 10.1.5.0/24 in its local database.
D.-R6 will not have any LSAs containing 10.1.5.0/24.
Answer:D
Cisco certification 352-001 352-001
NO.27 NetFlow provides valuable information about network users and applications, peak usage times, and
traffic routing. Which function is of NetFlow?
A.monitor configuration changes
B.monitor CPU utilization
C.monitor link utilization
D.generate traps for failure conditions
Answer:C
Cisco 352-001 352-001 352-001
NO.28 Which way can most effectively improve BGP convergence in the event that a point-to-point link, over
which an EBGP session is running, fails?
A.use BGP multihop
B.configure EBGP fast external fallover
C.enable BGP graceful restart
D.reduce the keepalive timer to the minimum value allowed
Answer:B
Cisco 352-001 examen certification 352-001
NO.29 The company is planning to deploy a new multicast application in its network to do real-time trading.
This application will be performed simultaneously by thousands of traders located throughout the network,
each a source of several IP multicast streams, to carry the "sell" and "buy" trading bids. All routers in its
network have full hardware support for all PIM multicast modes. Which mode can be used to minimize the
impact of the new application on the routers in the network?
A.PIM Source Specific Multicast
B.PIM Any-Source Multicast
C.PIM Dense Mode
D.PIM Bidirectional
Answer:D
Cisco 352-001 examen 352-001 352-001
NO.30 You work as a network technician for the Ltd. Study the exhibit carefully, router -RA is the hub router
in a Frame Relay hub-and-spoke deployment. Configure router -RA's serial interface as a
point-to-multipoint interface, and it is servicing three spoke routers. The link between Router -RC and the
frame provider experiences a service disruption, which causes the interface on Router -RC to go down.
How does Router -RA learn of this failure in the network and how does it react?
A.If OAM is configured between Router -RA and Router -RC, router -RA will be notified of the failure after
three missed OAM packets. After the third OAM packet is missed, the frame PVC becomes inactive, and
this event terminates the routing process neighbor relationship established between Router -RA and
Router -RC.
B.Router -RA does not detect the failure in the network and its interface continues to remain in an
operational state. If routing is configured over this link, Router -RA must wait for the neighbor relationship
to time-out before updating its routing table to account for the lost router and its networks.
C.Router -RA must wait for a full LMI status update from the provider frame switch before it is notified
about the PVC status. Once the full LMI status message is received, the routing process neighbor
relationship between Router -RA and Router -RC is immediately terminated.
D.Router -RA immediately detects the failure via LMI notification and its interface is placed in a
non-operational state. If routing is configured over this link, the neighbor relationship is terminated and the
routing table is updated. The change is then propagated as appropriate to the rest of the network.
Answer:B
certification Cisco 352-001 examen 352-001 examen 352-001
Votre vie changera beaucoup après d'obtenir le Certificat de Cisco 352-001. Tout va améliorer, la vie, le boulot, etc. Après tout, Cisco 352-001 est un test très important dans la série de test Certification Cisco. Mais c'est pas facile à réussir le test Cisco 352-001.
没有评论:
发表评论