Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat IBM LOT-801. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test IBM LOT-801. Choisir le produit de Pass4Test particulier pour le test Certification IBM LOT-801 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Si vous faites toujours la lutte contre le test IBM LOT-801, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de IBM LOT-801. Si vous avez déjà décidé à s'améliorer via IBM LOT-801, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Les produits de Pass4Test sont préparés pour le test Certification IBM LOT-801, y compris les formations et les informations ciblées au test IBM LOT-801. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM LOT-801 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM LOT-801 réel est lancée. C'est possible à réussir 100% avec le produit de IBM LOT-801. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test IBM LOT-801, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Code d'Examen: LOT-801
Nom d'Examen: IBM (IBM Lotus Notes Domino 8 Application Development Update)
Questions et réponses: 120 Q&As
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification IBM LOT-801, et aussi une meilleure assurance du succès du test LOT-801. Vous choisissez Pass4Test, vous choisissez le succès.
LOT-801 Démo gratuit à télécharger: http://www.pass4test.fr/LOT-801.html
NO.1 The default view in the Notes 8 Contacts database allows you to display the information in the view
either on a single line (as with a traditional Notes view) or in a "business card" style format with each entry
displayed in an individual box and the boxes arranged in columns, scrolling vertically. To create a view
that allows this sort of "business card" format, what type of Layout Viewer do you need to specify in the
View Properties?
A. Tiled
B. Boxed
C. Vertical
D. Composite
Answer: A
certification IBM LOT-801 certification LOT-801 certification LOT-801 LOT-801 examen
NO.2 Timmy is designing a View and he wants to use the new "Split Action Button" option for one of his
Actions. He creates an Action with sub-actions and checks the "Display as split button" box, but the Action
doesn't work as a Split button when he looks at the view in his Notes client. Why is this?
A. Split Action buttons work only for Shared Actions.
B. Split Action buttons work only for Forms.
C. Split Action buttons work only for Composite Applications.
D. The "Enable Advanced Action Bar" setting in the View properties has not been checked.
Answer: C
IBM LOT-801 LOT-801 examen LOT-801
NO.3 Beatrice created a new Composite Application database in the Notes 8 client, but when she opens it up
she sees a grey page that says "This Application page does not contain any content." What does she
have to do next?
A. Click the menu option "View - Design" to open the database in Domino Designer to edit the Composite
Application definition.
B. Click the menu option "Actions - Edit Application" to open the database in the Composite Application
Editor to edit the Composite Application definition.
C. Double-click the grey page to open the database in the Composite Application Editor to edit the
Composite Application definition.
D. Right-click the grey page to open the database in Domino Designer to edit the Composite Application
definition.
Answer: B
IBM examen LOT-801 certification LOT-801
NO.4 Victor has a Movie Rental Notes application with a Movie Inventory view. The database is not full-text
indexed, and users are complaining about the long search times when they attempt to search the
database. How can Victor prevent searching in this database if no full-text index has been created?
A. Select the don't allow simple search option in the Database properties.
B. Deselect the allow simple search option in the Movie Inventory view properties.
C. Deselect the allow simple search option in the Movie Inventory document properties.
D. Select the ponfirm full text index before search option in the Database properties.
Answer: A
certification IBM certification LOT-801 LOT-801
NO.5 Linda has selected the database property Support Response Thread History for her Call Log
application. When she looks at the document fields in the Document Properties dialog box, she notices a
new field has been added to each new document. What field does Linda see?
A. $TUA
B. $REF
C. $SRTH
D. $REF2
Answer: A
IBM certification LOT-801 LOT-801 examen LOT-801 LOT-801
NO.6 Barry has just closed the Property Broker Editor after specifying input and output Action parameters for
his Composite Application Editor (CAE). He notices a curved arrow icon in Domino Designer next to the
name of the Wiring Property. What should Barry do to ensure that his changes are saved within his
Domino application?
A. Click the "Refresh" button, and then click the "Open" button in the window that displays.
B. Nothing. The Property Broker automatically saves changes inside the Domino application.
C. Click the "Merge WSDLs" button and click "OK" in the confirmation prompt that then displays.
D. Open the Wiring Property properties and ensure that the "Store in NSF" option is selected. The
changes will be saved within the Domino application when Domino Designer is closed.
Answer: A
IBM LOT-801 certification LOT-801
NO.7 When Bert is designing his Composite Application, he wants to have a Notes view that publishes a
UserName property to another view and also to a Notes form that is open in edit mode. How does he do
this?
A. He simply uses the Composite Application Editor to wire all three components together.
B. He creates one Composite Application that wires the two views together, and then a second
Composite Application that incorporates the first one, with the first view wired to the form.
C. Because each component can only publish a single property, he has to wire the first view publish the
user name to the second view, and then wire the second view to publish the user name to the form.
D. Because he can publish a property only to a single component, he has to make his first view publish
two properties (e.g. UserName1 and UserName2) that both have the same data, so that one of the
properties is wired to the second view and the other is wired to the form.
Answer: A
IBM LOT-801 LOT-801 LOT-801
NO.8 The new Rich Text Lite "Thumbnail" input type allows you to specify the height and width of the
thumbnail image, along with what other attribute?
A. File type
B. Color depth
C. Image resolution
D. Attachment name
Answer: D
IBM LOT-801 examen certification LOT-801
NO.9 Luigi has created a view for his mail file that shows the size of the document. In that column, he would
like to display the size as either kilobytes or megabytes. How can Luigi accomplish this?
A. Set the number format for the column to Size(K/M/G)
B. Set the number format for the column to Bytes(K/M/G)
C. Set the Preferences For Display format for the column to Size(K/M/G)
D. Set the Additional Display Formatting for the column to Bytes(K/M/G)
Answer: B
IBM examen certification LOT-801 LOT-801 examen LOT-801
NO.10 Clarisa's agent needs to run every time the APP012 server is rebooted. There is no harm to data if the
agent runs repeatedly, but Clarisa would like to minimize the impact to server performance. How should
Clarisa trigger the agent to run?
A. Set the Runtime Trigger option to "On event", and select "When server starts".
B. Set the Runtime Trigger option to "On event", and select "On agent manager start".
C. Set the Runtime Trigger option to "On schedule". Select "Run once", and select the schedule option
"On server boot".
D. Set the Runtime Trigger option to "On schedule". Select "More than once a day". Clarisa should
determine how soon after a server boot the agent must be run. The schedule frequency should be set to
that amount of time.
Answer: A
IBM examen LOT-801 LOT-801
NO.11 Bonnie has a Customer view in her application that has the following columns (in order): Customer
Name, Customer Address, Customer Phone, Customer Comments, Last Contacted. She would like to
maximize the amount of column space for the Customer Comments field. How would Bonnie accomplish
this in Designer?
A. Select the "Maximum Width" property for the Customer Comment column.
B. Set the Height indicator to 9 lines for the Customer Comments column.
C. Select the extend to use available window width property for the Customer Comment column
D. Add the column name to the xtend to use available window width property in the Customer view.
Answer: C
certification IBM LOT-801 LOT-801 LOT-801 examen
NO.12 Samir wants to design and deploy a Composite Application that consists of components from two Lotus
Notes databases that both reside on the same Domino Server. He would like to include the Composite
Application definition inside one of the Lotus Notes databases, to make it easier to deploy and replicate.
Can he do this?
A. No, a Composite Application definition must be hosted on a WebSphere Portal server.
B. No, a Composite Application definition must reside in a Lotus Notes database that is based on the
"Blank Composite Application" template.
C. Yes, he simply needs to click the "New Composite Application" button in the Composite Applications -
Application section of the Database design and begin writing the definition.
D. Yes, but first he needs to define the Composite Application in the Composite Application Editor and
save the resulting XML file. Then he can create a new definition in the Composite Applications -
Application section of the Database design and import the XML.
Answer: D
certification IBM LOT-801 LOT-801 LOT-801 examen
NO.13 Thomas has utilized the right-click menu option feature in his application to show his custom actions.
He would like to present users with just the custom actions when they right-click with their mouse. How
can he accomplish this?
A. Remove the default menu items from the Action Bar of the view.
B. Deselect include action in Action Bar in the Action button properties of the view.
C. Deselect show default items in right-mouse menu in the Action Bar properties of the view.
D. Select emove default items in right-mouse menu?in the Action button properties of the view.
Answer: C
certification IBM LOT-801 examen LOT-801 LOT-801 examen LOT-801
NO.14 Nina has been asked to add several views to the Sales.nsf database, many of which are to include
multiple sorted columns and multiple user-sortable columns. How can she help minimize the impact to the
server from these new views?
A. Select the "Defer index creation until first use" Advanced Option from the Advanced tab of the
database properties.
B. Open each view that includes sorted or user-sortable columns. Select the "Defer index creation until
first use" Index option from the Advanced tab of the view properties.
C. Open each view that includes sorted columns. From the Sorting tab of the column properties of each
sorted column, select the "Defer index creation until first use" option.
D. Open each view that includes a user-sortable column. From the Sorting tab of the column properties of
each user-sortable column, select the "Defer index creation until first use" option.
Answer: D
IBM certification LOT-801 LOT-801 LOT-801 examen
NO.15 The new "Composite Settings" option in a View column Properties box allows you to specify what?
A. An Action to perform when a row in the view is selected
B. A Property to publish when a row in the view is selected
C. Whether or not to display the column when the view is used in a Composite Application
D. An alternate font type, size, and color to use for that column when the view is used in a Composite
Application
Answer: B
certification IBM LOT-801 LOT-801 examen LOT-801 certification LOT-801
NO.16 Maxie is using the new "Defer index creation until first use" option in her views that have sortable
columns, in order to delay creation of these extra indices until they are needed. She notices that the extra
column indices are still being built immediately instead of being deferred. Why is this?
A. This option works only for categorized columns.
B. This option is related to the database's full-text index, not the view index.
C. This option is valid only when the view is used in a composite application.
D. The server administrator needs to set the ENABLE_ON_DEMAND_COLLATIONS=1 setting in the
server's Notes.ini file.
Answer: D
IBM LOT-801 LOT-801 examen
NO.17 Myrtle is modifying the design of a View in a Notes database, so it can update a published Property that
the other components in a Composite Application can respond to. Where does she write code that
updates a Property?
A. In a view action
B. In the OnSelect event of the view
C. In the QueryModeChange event of the view
D. In the Initialize subroutine of the Global section of the view
Answer: B
certification IBM LOT-801 examen LOT-801 examen LOT-801 examen
NO.18 Kyle is designing a Composite Application that can send a user name from a form to a view, by clicking
a button on the form. He knows he wants to define a Wiring property called ReceiveUserName that will be
used when the view is receiving a user name string that is published by the form. When he opens the
Property Broker Editor to define "ReceiveUserName", what does he define it as?
A. Type
B. Action
C. Event
D. Property
Answer: B
IBM examen certification LOT-801 certification LOT-801 LOT-801
NO.19 Kristen has been asked to develop a Composite Application to "wire" the Customer, Orders, and
Inventory applications together. She understands that this will result in communication among the
different pieces of the new application. How does this communication work?
A. Components use the Composite Application Broker to communicate with each other. The Composite
Application Editor is used to define Actions
and their parameters, and to configure Property Broker options.
B. Components use the Composite Application Broker to communicate with each other. The Composite
Application Editor is launched from Domino
Designer to define Broker Properties and configure Actions and their parameters.
C. Components use the Property Broker to communicate with each other. The Property Broker Editor is
launched directly from Domino Designer (or
can be launched via the CAE) to define Properties and configure Actions and their parameters.
D. Components use the Property Broker to communicate with each other. Domino Designer must first be
used to define the Wiring Properties.
Composite Application Broker options can then be configured using the Composite Application Editor or
from within Domino Designer.
Answer: C
certification IBM LOT-801 LOT-801 examen LOT-801 examen
NO.20 Scott has just created a new NSF-based Composite Application. He has added two components to his
application and is about to close the Composite Application Editor (CAE). What does he need to do if he
now wants to see how his Composite Application appears in the user interface?
A. Scott will not be able to open the Composite Application within the user interface yet. The database
launch properties must first be set to "Launch as Composite Application".
B. Nothing. The CAE is opened from within the Composite Application. When Scott exits the CAE, he is
automatically presented again with the Composite Application, open in the user interface.
C. Scott will not be able to open the Composite Application within the user interface yet. He will first need
to open the Composite Application using Domino Designer and set the Wiring Properties.
D. When Scott exits the CAE, he is back at the Notes Workspace, just as when exiting other NSF-based
applications. Double-click on the Composite Application's icon on the Workspace to open it in the user
interface.
Answer: B
certification IBM certification LOT-801 LOT-801 certification LOT-801 LOT-801
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification IBM LOT-801, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
没有评论:
发表评论