Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Pass4Test est un catalyseur de votre succès de test Cisco 350-001. En visant la Certification de Cisco, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Cisco 350-001, la Q&A Cisco 350-001 est un bon choix pour vous.
Code d'Examen: 350-001
Nom d'Examen: Cisco (CCIE Routing and Switching Written)
Questions et réponses: 508 Q&As
Selon les anciens test Cisco 350-001, la Q&A offerte par Pass4Test est bien liée avec le test réel.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Cisco 350-001. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Cisco 350-001.
Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Cisco 350-001.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Cisco 350-001 est une bonne examination. Mais c'est difficile à passer le test Cisco 350-001. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
350-001 Démo gratuit à télécharger: http://www.pass4test.fr/350-001.html
NO.1 As a network administrator, can you tell me what the root guard feature provides in a bridged network?
A. It ensures that BPDUs sent by the root bridge are forwarded in a timely manner
B. It enforces the root bridge placement in the network
C. It ensures that all ports receiving BPDUs from the root bridge are in the forwarding state.
D. It ensures that the bridge is elected as Root Bridge in the network.
Answer: B
Cisco examen 350-001 350-001 examen certification 350-001
NO.2 Prior to 802.1w, Cisco implemented a number of proprietary enhancements to 802.1D to improve
convergence in a Layer 2 network. Which statement is correct?
A. Only UplinkFast and BackboneFast are specified in 802.1w; PortFast must be manually configured.
B. Only PortFast is specified in 802.1w; UplinkFast and BackboneFast must be manually configured.
C. None of the proprietary Cisco enhancements are specified in 802.1w.
D. PortFast, UplinkFast, and BackboneFast are specified in 802.1w.
Answer: D
certification Cisco 350-001 certification 350-001 350-001
NO.3 Which standard supports multiple instances of spanning tree?
A. 802.1D
B. 802.1s
C. 802.1w
D. 802.1z
Answer: B
certification Cisco certification 350-001 350-001 certification 350-001 certification 350-001
NO.4 The classic Spanning Tree Protocol (802.1D 1998) uses which sequence of variables to determine the
best received BPDU?
A. 1) lowest root bridge id,
2) lowest sender bridge id,
3) lowest port id,
4) lowest root path cost
B. 1) lowest root path cost,
2) lowest root bridge id,
3) lowest sender bridge id,
4) lowest sender port id
C. 1) lowest root bridge id,
2) lowest sender bridge id,
3) lowest root path cost
4) lowest sender port id
D. 1) lowest root bridge id,
2) lowest root path cost,
3) lowest sender bridge id,
4) lowest sender port id
Answer: D
Cisco 350-001 examen 350-001 350-001
NO.5 Refer to the exhibit.
In the diagram, the switches are running IEEE 802.1w RSPT.
On which ports should root guard be enabled in order to facilitate deterministic root bridge election under
normal and failure scenarios?
A. GE-3/1, GE-3/2
B. FE-2/1, FE-3/2
C. GE-1/1.GE-1/2
D. GE-4/1, GE-4/2
E. GE-2/1, GE-2/2
F. GE-3/1, GE-3/2, GE-4/1, GE-4/2, FE-2/1, FE-3/2
Answer: F
Cisco 350-001 examen 350-001
NO.6 What is the purpose of the STP PortFast BPDU guard feature?
A. enforce the placement of the root bridge in the network
B. ensure that a port is transitioned to a forwarding state quickly if a BPDU is received
C. enforce the borders of an STP domain
D. ensure that any BPDUs received are forwarded into the STP domain
Answer: C
certification Cisco 350-001 350-001 examen 350-001 350-001
NO.7 Which of these correctly identifies a difference between the way BPDUs are handled by 802.1w and
802.1D?
A. 802.1D bridges do not relay BPDUs.
B. 802.1w bridges do not relay BPDUs.
C. 802.1D bridges only relay BPDUs received from the root.
D. 802.1w bridges only relay BPDUs received from the root.
Answer: C
Cisco 350-001 350-001 350-001 350-001
NO.8 Refer to the exhibit.
In the diagram, the switches are running IEEE 802.1s MST. Which ports are in the MST blocking state?
A. GE-1/2 and GE-2/1
B. GE-1/1 and GE-2/2
C. GE-3/2 and GE-4/1
D. no ports are in the blocking state
E. There is not enough information to determine which ports are in the blocking state.
Answer: D
certification Cisco 350-001 examen 350-001 350-001
NO.9 Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree
Protocol IEEE 802.1D.? (Choose two)
A. Designated Root Cost
B. bridge ID priority
C. max age
D. bridge ID MAC address
E. Designated Root Priority
F. forward delay
Answer: BD
certification Cisco certification 350-001 certification 350-001 350-001
NO.10 You have done a partial migration from 802.1D STP to 802.1w STP. Which of the following is true?
A. 802.1D and 802.1w interoperate only when the 802.1D STP domain supports rapid convergence.
B. Ports leading to 802.1D devices will run in compatibility mode, while the rest of the ports will run in
802.1w mode.
C. This is an invalid configuration and a partial migration cannot be done.
D. The bridge timers will be set to match the 802.1D devices.
E. A secondary root bridge will always be populated within the 802.1D domain.
F. If the root bridge is selected within the 802.1D domain, the whole STP domain will run in 802.1D
compatibility mode.
G. In partially migrated 802.1w networks, it is recommended to keep the STP diameter below 4.
Answer: B
Cisco 350-001 350-001
NO.11 Which three port states are used by RSTP 802.1w? (Choose three.)
A. Listening
B. Learning
C. Forwarding
D. Blocking
E. Discarding
F. Disabled
Answer: BCE
Cisco 350-001 examen certification 350-001
NO.12 Refer to the exhibit.
Which switching feature is being tested?
A. loop guard
B. PortFast
C. root guard
D. BDPU guard
Answer: A
Cisco 350-001 examen certification 350-001 certification 350-001 certification 350-001 350-001 examen
NO.13 Loop guard and UniDirectional Link Detection both protect against Layer 2 STP loops. In which two
ways does loop guard differ from UDLD in loop detection and prevention? (Choose two)
A. Loop guard can be used with root guard simultaneously on the same port on the same VLAN while
UDLD cannot.
B. UDLD protects against STP failures caused by cabling problems that create one-way links.
C. Loop guard detects and protects against duplicate packets being received and transmitted on different
ports.
D. UDLD protects against unidirectional cabling problems on copper and fiber media.
E. Loop guard protects against STP failures caused by problems that result in the loss of BPDUs from a
designated switch port
Answer: BE
Cisco certification 350-001 350-001 350-001
NO.14 When STP UplinkFast is enabled on a switch utilizing the default bridge priority, what will the new bridge
priority be changed to?
A. 8192
B. 16384
C. 49152
D. 65535
Answer: C
Cisco certification 350-001 certification 350-001 350-001 350-001
NO.15 If a port configured with STP loop guard stops receiving BPDUs, the port will be put into which state?
A. learning state
B. listening state
C. forwarding state
D. loop-inconsistent state
Answer: D
Cisco examen 350-001 certification 350-001 certification 350-001
NO.16 What two features in Cisco switches help prevent Layer 2 loops? (Choose two)
A. UniDirectional Link Detection
B. Hot Standby Router Protocol
C. Virtual Router Redundancy Protocol
D. PortFast
E. Root guard
F. Loop guard
Answer: AF
Cisco examen 350-001 certification 350-001 350-001 350-001
NO.17 Under which two circumstances would an RSTP bridge flush its CAM table? (Choose two)
A. Upon a port state change
B. Upon receiving a topology change notification
C. When transitioning from discarding to forwarding
D. When transitioning from forwarding to discarding
E. Only when changing from listening to discarding
F. When CAM resources have been completely used up
Answer: BC
Cisco 350-001 350-001 examen certification 350-001
NO.18 Spanning Tree Protocol calculates path cost based on which of these?
A. interface bandwidth
B. interface delay
C. interface bandwidth and delay
D. hop count
E. bridge priority
Answer: A
certification Cisco 350-001 examen 350-001 examen certification 350-001
NO.19 Spanning Tree Protocol IEEE 802.1s defines the ability to deploy which of these?
A. one global STP instance for all VLANs
B. one STP instance for each VLAN
C. one STP instance per set of VLANs
D. one STP instance per set of bridges
Answer: C
certification Cisco 350-001 certification 350-001 350-001
NO.20 Why does RSTP have a better convergence time than 802.1D?
A. It is newer
B. It has smaller timers
C. It has less overhead
D. It is not timer-based
Answer: D
certification Cisco 350-001 examen certification 350-001 350-001
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Cisco 350-001 très tôt. Pass4Test peut vous permettre à réussir 100% le test Cisco 350-001, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
没有评论:
发表评论