Le Certificat de Hitachi HH0-300 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Hitachi HH0-300, c'est-à-dire avoir une grande fortune. Le Certificat Hitachi HH0-300 peut bien tester des connaissances professionnelles IT. La Q&A Hitachi HH0-300 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Le test Hitachi HH0-350 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
Le Certificat de Hitachi HH0-300 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Hitachi HH0-300, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test HH0-300 sans aucun éffort, en même temps, le test de Hitachi HH0-300 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Hitachi HH0-300 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Code d'Examen: HH0-300
Nom d'Examen: Hitachi (HITACHI DATA SYSTEMS CERTIFIED EXPERT -REPLICATION SOLUTIONS ARCHITECT)
Questions et réponses: 112 Q&As
Code d'Examen: HH0-350
Nom d'Examen: Hitachi (HITACHI DATA SYSTEMS CERTIFIED SPECIALIST -NAS ARCHITECT)
Questions et réponses: 60 Q&As
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Hitachi HH0-300. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Hitachi HH0-300. Ajoutez la Q&A au panier.
HH0-300 Démo gratuit à télécharger: http://www.pass4test.fr/HH0-300.html
NO.1 A customer is using Hitachi Universal Replicator (HUR) and does not have sufficient network
bandwidth. During a peak write workload, the customer overflows their HUR journals and
replication suspends in error.
What happens when the customer issues a resychronization?
A. HUR performs an initial copy.
B. HUR performs a differential copy.
C. HUR performs a no copy.
D. HUR performs an at-time split.
Answer: B
certification Hitachi HH0-300 examen certification HH0-300 HH0-300 examen HH0-300 examen
NO.2 The customer's administrator estimates that the time required to bring up the network is one
hour; the time required to bring up recovery hosts will be two hours; and that the time required to
failover storage and present to hosts is thirty minutes. The recovery process must be done in
sequence. The customer has a Recovery Time Objective (RTO) of three hours.
What is the difference between the RTO and the estimated time to recover?
A. The customer will be over their RTO by one hour.
B. The customer will be under their RTO by one hour.
C. The customer will be over their RTO by thirty minutes.
D. The customer will be under their RTO by thirty minutes.
Answer: C
Hitachi examen HH0-300 HH0-300
NO.3 A customer is using Hitachi Universal Replicator to continuously replicate a database's data
and log volumes.
Which two statements describe what will happen? (Choose two.)
A. A database checkpoint will be created upon failover.
B. At recovery time, the database will reconcile logs and transactions.
C. In the case of a planned outage, log volumes may not include all transactions.
D. In the case of an unplanned outage, log volumes may not include all transactions.
Answer: B,D
Hitachi examen certification HH0-300 HH0-300 examen certification HH0-300 HH0-300 examen
NO.4 A customer is implementing TrueCopy between their primary and secondary data centers. Due
to budget constraints the RCU has larger, slower disk drives than the MCU.
What is the risk associated with the design?
A. Primary volumes may suspend
B. Journal utilization may increase
C. Host response time may increase
D. Back-end director utilization may increase
Answer: C
certification Hitachi certification HH0-300 certification HH0-300
NO.5 Which tool is used to capture workload data in a VMware environment?
A. RIAT
B. SAR
C. glance+
D. RMF magic
Answer: A
Hitachi HH0-300 examen HH0-300 examen certification HH0-300
NO.6 A customer has experienced a disaster and has failed over to their Hitachi Universal Replicator
copies at the secondary site. They have acquired new servers and storage for their production
facility and they are ready to return operations to the production facility as quickly as possible.
Which two fallback procedures apply? (Choose two.)
A. Order devices in the HORCM file from the lowest change rate to the highest change rate.
B. Replication pairs can be suspended to allow changed tracks to be managed using the bitmap.
C. Perform the initial copy with the -nocopy option to allow operations to resume immediately.
D. Initial copy is required from the recovery site back to the production site.
Answer: A,D
certification Hitachi HH0-300 certification HH0-300 HH0-300
NO.7 A large bank requires a no data loss copy of data over 250 km away, however they have
budget restrictions which prevent them from placing hosts at the in-region intermediate site and
therefore will always recover at the out-of-region remote location.
Which solution meets the requirement?
A. a three data center multi-target
B. a three data center cascade solution
C. a TrueCopy cascade off of a ShadowImagecopy
D. a Hitachi Universal Replicator cascade off of a ShadowImagecopy
Answer: B
Hitachi examen certification HH0-300 HH0-300 certification HH0-300 HH0-300
NO.8 Which two workload metrics are used to calculate replication bandwidth requirements?
(Choose two.)
A. disk latency
B. read/write ratio
C. host response time
D. total MB/sec throughput
Answer: B,D
Hitachi certification HH0-300 certification HH0-300 certification HH0-300
没有评论:
发表评论