Choisir le Pass4Test vous permet non seulement à réussir le test IBM C2180-376, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A IBM C2180-376 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test IBM C2180-376 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM C2180-376, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM C2180-376 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM C2180-376 sans aucune doute.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification IBM C2180-376, et aussi une meilleure assurance du succès du test C2180-376. Vous choisissez Pass4Test, vous choisissez le succès.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
Code d'Examen: C2180-376
Nom d'Examen: IBM (IBM WebSphere MQ V7.0, Solution Design)
Questions et réponses: 98 Q&As
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test IBM C2180-376 par une seule fois, vous n'aurez pas aucune raison à refuser.
Le test IBM C2180-376 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test IBM C2180-376. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
C2180-376 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-376.html
NO.1 An organization has a widely distributed online environment, where applications are
connected via
WebSphere MQ messaging. A business requirement is brought forward that certain mission
critical
applications record audit trail data which is to be collected in a central location. No
information can be lost.
A central data warehouse must be loaded daily with this information as soon as possible after
end of
business. Which of the following proposed solutions is best in terms of the requirement,
reliability and
overall performance? The audit trail data is:
A. written to a file on the local file system and transmitted to the central audit trail server via
reliable file
transfer over WebSphere MQ.
B. sent as a persistent WebSphere MQ message and forwarded to the queue manager of the
central
server asynchronously.
C. inserted into a central database table via a remote access database client under control of
the local
WebSphere MQ transaction.
D. inserted into a local database table under two phase commit using WebSphere MQ as the
transaction
manager and a bulk update is performed at end of day.
Answer: B
IBM C2180-376 certification C2180-376 C2180-376 C2180-376 examen C2180-376
NO.2 A bus company is implementing a solution which will display in real-time the arrival
information of the
next bus on the bus stop sign. Each bus is sending information about its position at regular
intervals. What
is the best way of implementing this solution given that there is limited bandwidth for
communication? The
bus stop sign:
A. subscribes to messages published by the bus
B. queries a central system for bus position using SOAP over HTTP
C. replicates its own database every few minutes with a database stored on a central system
D. sends a message with a request every few minutes to a central system in order to query
bus position.
All replies are compressed.
Answer: A
IBM C2180-376 certification C2180-376 C2180-376
NO.3 There are multiple instances of a cluster queue. Which of the following is
recommended practice for the
default binding (DEFBIND) parameter?
A. Allow the local WebSphere MQ administrators to define default binding as they think best
for each
instance of the queue.
B. Require the WebSphere MQ administrators to set default binding to the same value for all
instances of
the queue in the cluster.
C. The solution designer should consult with the development team and local WebSphere
MQ
administrator to determine how best to configure default binding of each queue manager.
D. The best option is to accept the default setting for default binding on each queue manager,
as it should
have been given the optimal setting by its WebSphere MQ administrator.
Answer: B
IBM C2180-376 examen C2180-376 examen C2180-376 examen
NO.4 A solution designer has requested that several queues on a z/OS queue manager be
defined with index
type set to message ID, i.e., INDXTYPE(MSGID). Why would a designer use this setting?
A. It creates a permanent index of MSGIDs that are currently in use for this queue.
B. It allows MQGET commands to have significantly improved performance when getting
messages by
message ID.
C. It ensures that any new MSGIDs are unique as well as making the retrieval of messages
based on
message ID more efficient.
D. The queue manager will keep an index of MSGIDs that have already been used to make
sure that the
message ID is unique when a new message is put.
Answer: B
IBM C2180-376 C2180-376 examen C2180-376 C2180-376 examen
NO.5 A new WebSphere MQ application with high volume requirements is being designed
to run on Solaris.
The solution designer is concerned about the performance of the application. The
WebSphere MQ for
Solaris V7 Performance Evaluation Report SupportPac provides all but one of the following
types of
information to the solution designer. Which is NOT discussed in this document?
A. Suggestions for tuning WebSphere MQ
B. Information that can be used to size the company new applicationInformation that can be
used to size
the company? new application
C. Evaluation of the relative cost of one WebSphere MQ API vs. another in different
scenarios
D. Evaluation of the relative cost of persistent messages vs. nonpersistent messages in
different
scenarios
Answer: C
IBM examen certification C2180-376 C2180-376
NO.6 Queue Managers QMA and QMB both have a cluster queue definition for Q1. A
sending application
resides on QMC, which is also part of the cluster. The messages being sent from QMC
contain data from
the same account that needs to be processed at the destination (Q1) in the same order that
the
messages were sent. Which one of the following is MOST LIKELY to enforce the sending
order on the
destination queue, assuming the message can be routed to the destination queue?
A. The sending application sends the messages for the account within the same unit of work
B. The sending application specifies the destination Queue Manager and Queue name on
the open for
Q1 and sends the messages for the account
C. The sending application opens Q1 with MQOO_BIND_ON_OPEN and sends the
messages for the
account
D. Q1 is defined with DEFBIND(OPEN) and the sending application opens Q1 and sends the
messages
for the account
Answer: C
certification IBM C2180-376 examen C2180-376 C2180-376
NO.7 Which of the following should generally be avoided if an application is being designed
for optimal
efficiency?
A. Make messages nonpersistent if they do not need to be recoverable.
B. Code programs to open and close queues, or connect and disconnect from the queue
manager only
once, if the queues or connection will be used again.
C. Bundle the data to be transmitted into as few messages as possible (e.g., rather than
sending a
hundred 1MB messages, send one 100MB message).
D. Group a batch of messages within a unit of work where appropriate, so that they can be
committed all
at once (e.g., get and put messages under syncpoint and commit them in groups of 10, rather
than
committing them individually).
Answer: C
IBM examen certification C2180-376 C2180-376 C2180-376 examen
NO.8 Which new feature in WebSphere MQ V7.0 needs to be taken into account when
WebSphere MQ
solutions are deployed into mixed z/OS and distributed environments?
A. Queue sharing groups are now available between z/OS and other platforms; however, at
least one
queue manager in the group must still be hosted on z/OS.
B. The use of WebSphere MQ Explorer for the administration of z/OS based queue
managers no longer
requires a license for the Client Attachment Feature (CAF) for a limited number of users.
C. WebSphere MQ Client applications from distributed environments can now directly
connect to z/OS
queue managers; the Client Attachment Feature (CAF) is no longer required.
D. A WebSphere MQ Client implementation on z/OS is now available, so that full WebSphere
MQ no
longer needs to be installed on all z/OS systems that want to participate in message queuing.
Answer: B
certification IBM C2180-376 certification C2180-376 C2180-376 examen
NO.9 An application creates documents in PDF format, which are subsequently transmitted
via WebSphere
MQ to a number of other servers in the network. Each server runs its own queue manager.
The
documents received by some servers are consistently corrupted, whereas on other servers
the
documents are intact. Other message traffic seems unaffected. What is the most likely
source of this
problem?
A. The environment variable MQCCSID specifies an incorrect value on the affected servers.
B. Incompatible message compression parameters are configured on the sending and
receiving channel
agents.
C. The network connection to the affected servers is unreliable and a message retry exit was
not specified
on the sending channel agent.
D. The affected servers run different CCSIDs from the servers creating the documents and
the message
descriptor specifies MQMD.Format as QSTR? causing message conversion.?QSTR?
causing message
conversion.
Answer: D
IBM C2180-376 examen C2180-376
NO.10 In designing a solution with availability in mind, the designer is considering the following
two
alternatives, one using a cluster queue and the other using a shared queue. In each
scenario, Queue
Managers QMA and QMB will both be capable of running Application A. In the first scenario,
Application A
will run on QMA and QMB on Windows accessing cluster queue QA. In the second scenario,
Application A
will run on QMA and QMB on z/OS accessing shared queue QA. Which of the following
describes the
availability scenarios in the situation where QMA fails?
A. For Windows, the delivered messages on QA that Application A on QMA did not get to
process are
available for processing by Application A on QMB
B. For z/OS, the delivered messages on QA that Application A on QMA did not get to process
are
available for processing by Application A on QMB
C. For Windows, messages from QA that were in flight on QMA when it failed are made
available for
processing on QMB
D. For z/OS, messages from QA that were in flight on QMA when it failed are unavailable for
processing
by QMB
Answer: B
IBM C2180-376 C2180-376 examen C2180-376 examen
NO.11 A solution designer is considering different API options for a new WebSphere MQ
application. Only IBM
supported WebSphere MQ programming options should be considered. Which one of the
following is not
supported by IBM?
A. XMS
B. JMS
C. Perl
D. WebSphere MQ classes for .NET
Answer: C
IBM certification C2180-376 C2180-376 examen
NO.12 A master data management solution has been implemented for the enterprise.
Updates with customer
and product data need to be distributed to several applications. What is the BEST approach
given that not
all applications might be interested in every customer type?
A. Use the publish/subscribe paradigm.
B. Receive updates on application-specific queues. Message properties and selectors should
be used for
filtering.
C. Browse a common queue for updates.
D. Use a request-reply pattern and query the MDM (Master Data Management) application.
Answer: A
IBM C2180-376 examen C2180-376 C2180-376 C2180-376 examen
NO.13 A company has an MQI application on Windows that continuously browses a queue to
identify a
message before removing it for processing. The application has only one program reading
the queue. The
company is experiencing increased volumes, and there is a need to add additional instances
of the
browsing program. Which of the following options could help with splitting and managing the
workload
across the multiple browsing programs?
A. Use browse with lock
B. Use browse with message under cursor
C. Use browse with priority sequencing
D. Use MQ cooperative browsing optionsUse MQ? cooperative browsing options
E. Share an object handle across the programs
Answer: A D
IBM examen certification C2180-376 C2180-376 C2180-376 examen C2180-376 examen
NO.14 A solution designer is evaluating distribution scenarios and wants to understand the
circumstances
where messages are not delivered as expected. Which of the following are reasons that a
message is
placed on the DLQ?
A. A trigger monitor is unable to start the triggered program
B. The destination queue is full when the program puts the message to the local queue
C. The queue manager is quiescing when the program puts the message to the queue
D. A sending message channel agent is unable to perform data conversion when required for
the
message
E. The program tries to put a message to an invalid local queue
Answer: A D
certification IBM C2180-376 C2180-376 C2180-376 certification C2180-376
NO.15 A solution developer is writing a C language application on a UNIX platform. There is
a requirement
for the transactions to be processed within syncpoint control. What is the MINIMUM required
MQ
component on the application platform to achieve this functionality?
A. WebSphere MQ Client Installation
B. WebSphere MQ Extended Transactional Client Installation
C. WebSphere MQ Server Installation
D. WebSphere MQ Server Installation with the XA capabilities configured
Answer: A
IBM C2180-376 C2180-376 examen C2180-376 C2180-376
NO.16 An application is required to retrieve rows from a relational database table and send
them across
WebSphere MQ to a remote queue manager, where a receiving application consumes them.
After a
successful MQPUT of a message, the corresponding row is to be deleted from the database.
It is intended
to run this application using the free WebSphere MQ Client. The delivery of each message is
to be
guaranteed. Which of the following is true about this implementation?
A. It cannot be done using the free WebSphere MQ Client; the Extended Transactional Client
is required,
since two phase commits are needed for this solution.
B. It cannot be done using the free WebSphere MQ Client; a local queue manager is required
to support
the guaranteed delivery of the messages.
C. This solution can be implemented using the free WebSphere MQ Client, provided that the
receiving
application can recognize and handle repeated delivery of the same message.
D. This solution cannot be implemented using the free WebSphere MQ Client; persistent
messaging is not
supported by the free WebSphere MQ Client.
Answer: C
IBM certification C2180-376 C2180-376 C2180-376 C2180-376 examen C2180-376
NO.17 The topic object for the topic x/y is defined with WILDCARD=PASSTHRU. Which of
the following is the
most appropriate use of a wildcard for this topic?
A. Subscribe to topic x/y/#
B. Publish the information to topic x/y/#
C. Publish the information to topic x/y/+
D. It is not possible to use a wildcard with this topic
Answer: A
IBM certification C2180-376 C2180-376
NO.18 An application queue is triggered for trigger type of DEPTH. Following this, what
action should the job
or program that was started as a result of the trigger take before it ends, so that the queue
will be
triggered again the next time that trigger depth (TRIGDPTH) is reached?
A. It needs to use MQSET or an ALTER QLOCAL command to reset triggering (TRIGGER)
for the queue.
B. It needs to reset trigger depth (TRIGDPTH) for the queue through an MQSET or ALTER
QLOCAL
command.
C. It needs to reset trigger depth (TRIGDPTH) and triggering (TRIGGER) for the queue,
using MQSET or
an ALTER QLOCAL command.
D. No action needs to be taken. The queue manager will create the next trigger message
when the
current depth of the queue once again reaches trigger depth (TRIGDPTH).
Answer: A
certification IBM C2180-376 C2180-376 certification C2180-376 certification C2180-376
NO.19 An application is being designed which will send updates about customers to different
applications.
Given the sensitive nature of the data, the sending application needs to manage which
applications
receive the data. Which of the following is the best solution to ensure this?
A. Apply the publish-subscribe paradigm (one-to-many).
B. Each application should have its own queue on which it will listen for updates
C. All applications should listen on the same queue and after processing the message should
update its
header so the last application process can remove it from the queue
D. All receiving applications should listen on the same queue and the sending application
should send
separate copies of the message with attributes which allow the receiving applications to
search the queue
for their own copies.
Answer: B
IBM examen C2180-376 C2180-376 examen certification C2180-376 C2180-376 examen
NO.20 A suite of server applications is to be designed to support the graceful shutdown
capabilities of
WebSphere MQ implemented via the ail ifA suite of server applications is to be designed to
support the
graceful shutdown capabilities of WebSphere MQ implemented via the ?ail if
quiescing?feature. Which of
the following best describes the use of this feature?
A. Applications that have this feature activated can request an extra grace period of a
configurable length
that will allow them to complete critical processing before the queue manager will disconnect
them.
B. Applications using this feature will be informed of the queue manager quiescing via a
completion code
of MQCC_FAILED and a reason code of MQRC_Q_MGR_QUIESCING (or
MQRC_CONNECTION_QUIESCING) and will be disconnected automatically. Applications
are expected
to
periodically attempt reconnection.
C. Using FAIL_IF_QUIESCING options where valid with MQI calls, an application can finalize
MQ
processing, avoiding loss of data, before the queue manager is shut down.
D. When a queue manager is configured with the FAIL_IF_QUIESCING option and is being
shut down, it
will reject all MQI calls with a completion code of MQCC_FAILED and a reason code of
MQRC_Q_MGR_QUIESCING (or MQRC_CONNECTION_QUIESCING) in order to assure
fast and
reliable termination.
Answer: C
IBM certification C2180-376 certification C2180-376 certification C2180-376
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification IBM C2180-376, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification IBM C2180-376. Peut-être d'obtenir le Certificat IBM C2180-376 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
没有评论:
发表评论