Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test SASInstitute A00-202, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A SASInstitute A00-202 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat SASInstitute A00-202 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test SASInstitute A00-202.
Code d'Examen: A00-202
Nom d'Examen: SASInstitute (SAS advanced programming exam)
Questions et réponses: 85 Q&As
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de SASInstitute A00-202 très tôt. Pass4Test peut vous permettre à réussir 100% le test SASInstitute A00-202, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
A00-202 Démo gratuit à télécharger: http://www.pass4test.fr/A00-202.html
NO.1 Given the following SAS data sets ONE and TWO: ONE TWO NUM COUNTRY NUM CITY
______________ ______________
1 CANADA 3
BERLIN
2
FRANCE 5
TOKYO
3 GERMANY 4 BELGIUM
5 JAPAN
The following SAS program is submitted: proc sql; select country from one where not exists
(select * from two where one.num = two.num); quit; Which one of the following reports is generated?
A. COUNTRY
GERMANY JAPAN
B. COUNTRY FRANCE BELGIUM
C. COUNTRY
CANADA FRANCE BELGIUM
D. COUNTRY
CANADA FRANCE GERMANY
Answer: C
SASInstitute A00-202 examen A00-202 examen A00-202 certification A00-202
NO.2 The following SAS program is submitted: <insert statement here>; %let development = ontime; proc
print data = sasuser.highway; title "For &dept"; title2 "This project was completed &development"; run;
Which one of the following statements completes the above and resolves title1 to "For
research&development"?
A. %let dept = %str(research&development);
B. %let dept = %str(research%&development);
C. %let dept = %nrstr(research&development);
D. %let dept = %nrstr(research%&development);
Answer: C
certification SASInstitute certification A00-202 A00-202 certification A00-202
NO.3 Which one of the following is an advantage of creating and using a SAS DATA step view?
A. It can store an index.
B. It always accesses the most current data.
C. It works quickly through multiple passes of the data.
D. It is useful when the underlying data file structure changes.
Answer: B
SASInstitute certification A00-202 A00-202 A00-202
NO.4 The following SAS program is submitted: data new (bufsize = 6144 bufno = 4); set old; run; Which one
of the following describes the difference between the usage of BUFSIZE= and BUFNO= options?
A. BUFSIZE= specifies the size of the input buffer in bytes; BUFNO= specifies the number of input
buffers.
B. BUFSIZE= specifies the size of the output buffer in bytes; BUFNO= specifies the number of output
buffers.
C. BUFSIZE= specifies the size of the output buffer in kilobytes; BUFNO= specifies the number of input
buffers.
D. BUFSIZE= specifies the size of the output buffer in kilobytes; BUFNO= specifies the number of output
buffers.
Answer: B
SASInstitute examen A00-202 certification A00-202 A00-202 examen A00-202
NO.5 Given the following SAS data sets ONE and TWO: ONE TWO YEAR QTR BUDGET YEAR QTR
SALES
2001 3 500 2001 4 300 2001 4 400 2002 1 600 2002 1 700
The following SAS program is submitted: proc sql; select one.*, sales from one, two; quit; Which one of
the following reports is generated?
A. YEAR QTR BUDGET SALES
2001 4 400 300 2002 1 700 600
B. YEAR QTR BUDGET SALES
2001 3 500 . 2001 4 400 300 2002 1 700 600
C. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 600
D. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 300 2001 3 500 600 2001 4 400 600 2002 1 700 600
Answer: D
certification SASInstitute A00-202 A00-202 examen A00-202 A00-202
NO.6 The following SAS program is submitted: data one; do i = 1 to 10; ptobs = ceil(ranuni(0) * totobs); set
temp point = ptobs nobs = totobs; output; end; stop; run; The SAS data set TEMP contains 2,500,000
observations. Which one of the following represents the possible values for PTOBS?
A. any integer between 1 and 10
B. any real number between 0 and 1
C. any integer between 1 and 2,500,000
D. any real number between 1 and 2,500,000
Answer: C
SASInstitute A00-202 examen A00-202 A00-202
NO.7 The variable attributes of SAS data sets ONE and TWO are shown below: ONE TWO # Variable Type
Len Pos # Variable Type Len Pos 2 sales Num 8 8 2 budget Num 8 8 1 year Num 8 0 3 sales Char 8 16 1
year Num 8 0 Data set ONE contains 100 observations. Data set TWO contains 50 observations. Both
data sets are sorted by the variable YEAR. The following SAS program is submitted: data three;
merge one two; by year; run; Which one of the following is the result of the program execution?
A. No messages are written to the SAS log.
B. ERROR and WARNING messages are written to the SAS log.
C. Data set THREE is created with two variables and 50 observations.
D. Data set THREE is created with three variables and 100 observations.
Answer: B
SASInstitute examen A00-202 A00-202 certification A00-202
NO.8 The following SAS program is submitted: proc sort data = sales tagsort; by month year; run; Which of
the following resource(s) is the TAGSORT option reducing?
A. I/O usage only
B. CPU usage only
C. I/O and CPU usage
D. temporary disk usage
Answer: D
SASInstitute examen A00-202 A00-202 A00-202
NO.9 The following SAS code is submitted: %macro houses(dsn = houses,sub = RANCH); data &dsn; set
sasuser.houses; if style = "&sub"; run; %mend; %houses(sub = SPLIT)
%houses(dsn = ranch) %houses(sub = TWOSTORY) Which one of the following is the value of the
automatic macro variable SYSLAST?
A. work.ranch
B. work.houses
C. WORK.RANCH
D. WORK.HOUSES
Answer: D
certification SASInstitute A00-202 examen A00-202 A00-202
NO.10 Given the following SAS data set ONE: ONE NUM VAR
1. 2 B 3C Which one of the following SQL programs deletes the SAS data set ONE?
A. proc sql; delete table one; quit;
B. proc sql; alter table one drop num, var; quit;
C. proc sql; drop table one; quit;
D. proc sql; delete from one; quit;
Answer: C
SASInstitute A00-202 examen A00-202
NO.11 Consider the following SAS log: 229 data sasuser.ranch sasuser.condo / view = sasuser.ranch;
230 set sasuser.houses; 231 if style = 'RANCH' then output sasuser.ranch; 232 else if style = 'CONDO'
then output sasuser.condo; 233 run; NOTE: DATA STEP view saved on file SASUSER.RANCH. NOTE: A
stored DATA STEP view cannot run under a different operating system. 234 235 proc print data =
sasuser.condo; ERROR: File SASUSER.CONDO.DATA does not exist. 236 run; NOTE: The SAS System
stopped processing this step because of errors. Which one of the following explains why the PRINT
procedure fails?
A. SASUSER.CONDO is a stored DATA step program.
B. A SAS data file and SAS data view cannot be created in the same DATA step.
C. A second VIEW=SASUSER.CONDO option was omitted on the DATA statement.
D. The view SASUSER.RANCH must be processed before SASUSER.CONDO is created.
Answer: D
certification SASInstitute certification A00-202 A00-202 examen A00-202 A00-202 A00-202
NO.12 Given the following SAS data sets ONE and TWO:
ONE TWO YEAR QTR BUDGET YEAR QTR SALES
2001 3 500 2001 4 300 2001 4 400 2002 1 600 ] 2002 1 700 The following SAS program is submitted:
proc sql; select one.*, sales from one, two
where one.year = two.year; quit; Which one of the following reports is generated?
A. YEAR QTR BUDGET SALES
2001 4 400 300 2002 1 700 600
B. YEAR QTR BUDGET SALES
2001 3 500 . 2001 4 400 300 2002 1 700 600
C. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 600
D. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 300 2001 3 500 600 2001 4 400 600 2002 1 700 600
Answer: C
SASInstitute certification A00-202 A00-202 certification A00-202 A00-202
NO.13 Which of the following statement(s) in the DATASETS procedure alters the name of a SAS data set
stored in a SAS data library?
A. RENAME statement only
B. CHANGE statement only
C. MODIFY and RENAME statements
D. MODIFY and CHANGE statements
Answer: B
SASInstitute A00-202 A00-202
NO.14 The SAS data set TEMP has the following distribution of values for variable A: A Frequency 1 500,000
2 500,000 6 7,000,000
3,000 Which one of the following SAS programs requires the least CPU time to be processed?
A. data new; set temp; if a = 8 then b = 'Small '; else if a in(1, 2) then b = 'Medium'; else if a = 6 then b =
'Large'; run;
B. data new; set temp; if a in (1, 2) then b = 'Medium'; else if a = 8 then b = 'Small'; else if a = 6 then b =
'Large'; run;
C. data new; set temp; if a = 6 then b = 'Large '; else if a in (1, 2) then b = 'Medium'; else if a = 8 then b =
'Small';
D. data new; set temp; if a = 6 then b = 'Large ';
if a in (1, 2) then b = 'Small'; run;
Answer: C
SASInstitute certification A00-202 A00-202
NO.15 Given the following SAS statement: %let idcode = Prod567; Which one of the following statements
stores the value 567 in the macro variable CODENUM?
A. %let codenum = substr(&idcode,length(&idcode)-2);
B. %let codenum = substr(&idcode,length(&idcode)-3);
C. %let codenum = %substr(&idcode,%length(&idcode)-2);
D. %let codenum = %substr(&idcode,%length(&idcode)-3);
Answer: C
SASInstitute certification A00-202 A00-202 examen A00-202 A00-202
NO.16 The following SAS program is submitted: %let value = 9; %let value2 = 5; %let newval = %eval(&value
/ &value2); Which one of the following is the resulting value of the macro variable NEWVAL?
A. 1
B. 2
C. 1.8
D. null
Answer:A
SASInstitute A00-202 A00-202 A00-202 examen
NO.17 Given the following SAS data set ONE: ONE REP COST
SMITH
200
SMITH
400
JONES
100
SMITH 600
JONES
100
JONES
200
JONES
400
SMITH
800
JONES
100
JONES 300
The following SAS program is submitted: proc sql; select rep, avg(cost) as AVERAGE from one group by
rep having avg(cost) > (select avg(cost) from one); quit; Which one of the following reports is generated?
A. REP AVERAGE
JONES 200
B. REP AVERAGE
JONES 320
C. REP AVERAGE
SMITH 320
D. REP AVERAGE
SMITH 500
Answer: D
certification SASInstitute certification A00-202 A00-202 examen A00-202
NO.18 Which one of the following programs contains a syntax error?
A. proc sql; select product.*, cost.unitcost, sales.quantity
from product p, cost c, sales s where p.item = c.item and p.item = s.item; quit;
B. proc sql; select product.*, cost.unitcost, sales.quantity from product, cost, sales where product.item =
cost.item and product.item = sales.item; quit;
C. proc sql; select p.*, c.unitcost, s.quantity from product as p, cost as c, sales as s where p.item = c.item
and p.item = s.item; quit;
D. proc sql; select p.*, c.unitcost, s.quantity from product, cost, sales where product.item = cost.item and
product.item = sales.item; quit;
Answer: D
SASInstitute A00-202 A00-202 A00-202
NO.19 Which one of the following statements is true?
A. The WHERE statement can be executed conditionally as part of an IF statement.
B. The WHERE statement selects observations before they are brought into the PDV.
C. The subsetting IF statement works on observations before they are read into the PDV.
D. The WHERE and subsetting IF statements can be used interchangeably in all SAS programs.
Answer: B
SASInstitute A00-202 examen certification A00-202 certification A00-202 A00-202
NO.20 Which one of the following options controls the pagesize of a SAS data set?
A. SIZE=
B. BUFNO=
C. BUFSIZE=
D. PAGESIZE=
Answer: C
SASInstitute A00-202 A00-202 A00-202 examen
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification SASInstitute A00-202. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test SASInstitute A00-202. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
没有评论:
发表评论