Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Juniper JN0-660. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Juniper JN0-660. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Le test Juniper JN0-660 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Juniper JN0-660 sans aucune doute si vous choisissez le Pass4Test.
Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Juniper JN0-660 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Juniper JN0-660. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Juniper JN0-660, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Code d'Examen: JN0-660
Nom d'Examen: Juniper (Service Provider Routing and Switching, Professional)
Questions et réponses: 171 Q&As
Le Certificat de Juniper JN0-660 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Juniper JN0-660, c'est-à-dire avoir une grande fortune. Le Certificat Juniper JN0-660 peut bien tester des connaissances professionnelles IT. La Q&A Juniper JN0-660 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
La Q&A Juniper JN0-660 de Pass4Test est liée bien avec le test réel de Juniper JN0-660. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Juniper JN0-660 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
JN0-660 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-660.html
NO.1 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D
Juniper certification JN0-660 JN0-660
NO.2 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D
Juniper JN0-660 examen JN0-660 examen JN0-660 certification JN0-660
NO.3 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D
certification Juniper JN0-660 JN0-660
NO.4 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C
certification Juniper JN0-660 certification JN0-660 JN0-660 JN0-660 examen
NO.5 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C
certification Juniper JN0-660 certification JN0-660 JN0-660 examen
NO.6 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C
certification Juniper JN0-660 examen JN0-660 certification JN0-660 JN0-660 examen
NO.7 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C
certification Juniper certification JN0-660 JN0-660 examen JN0-660 examen JN0-660 examen
NO.8 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D
Juniper examen certification JN0-660 JN0-660 JN0-660 examen
NO.9 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B
certification Juniper JN0-660 certification JN0-660 JN0-660 examen
NO.10 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D
Juniper examen certification JN0-660 JN0-660 examen JN0-660
NO.11 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B
certification Juniper certification JN0-660 JN0-660 JN0-660 examen certification JN0-660
NO.12 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A
Juniper JN0-660 certification JN0-660 certification JN0-660
NO.13 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A
Juniper examen certification JN0-660 JN0-660 JN0-660 examen
NO.14 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C
Juniper JN0-660 certification JN0-660 JN0-660
NO.15 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper examen certification JN0-660 JN0-660 JN0-660 examen
NO.16 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B
Juniper certification JN0-660 JN0-660 certification JN0-660
NO.17 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D
Juniper examen certification JN0-660 JN0-660 JN0-660 examen
NO.18 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B
Juniper certification JN0-660 JN0-660 JN0-660
NO.19 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C
Juniper JN0-660 examen JN0-660 examen JN0-660
NO.20 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C
Juniper JN0-660 examen JN0-660 examen
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Juniper JN0-660. Les documentations particulièrement visée au test Juniper JN0-660 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Juniper JN0-660.
没有评论:
发表评论