Le Certificat de Symantec ST0-050 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Symantec ST0-050, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test ST0-050 sans aucun éffort, en même temps, le test de Symantec ST0-050 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Symantec ST0-050 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Symantec ST0-050 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Symantec ST0-050 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
Code d'Examen: ST0-050
Nom d'Examen: Symantec (Symantec Network Access Control 11 (STS))
Questions et réponses: 100 Q&As
Le test Symantec ST0-050 est l'un très improtant dans tous les tests de Certification Symantec, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
La population de la Certification Symantec ST0-050 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
ST0-050 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-050.html
NO.1 What must an administrator specify in a custom requirement that is different from a predefined
requirement?
A. the client's policy manager domain
B. the client's group assignment
C. the policy's ending Host Integrity state
D. the policy's log entries
Answer: C
Symantec examen ST0-050 examen certification ST0-050 ST0-050 examen ST0-050 ST0-050 examen
NO.2 When is Host Integrity Checking enabled on a Symantec Network Access Control (SNAC) client?
A. when the Host Integrity policy is configured and distributed to the client
B. when the SNAC client is updated by LiveUpdate for content
C. during the heartbeat authentication process with the Enforcer
D. automatically when an upgrade to SNAC is made
Answer: A
certification Symantec certification ST0-050 ST0-050 examen ST0-050
NO.3 Which check can be performed using custom requirements to verify whether an antivirus product is
up-to-date on a client machine?
A. check the date of the associated signature data file(s) on the client
B. check the date of the associated signature data files(s) on the LiveUpdate server
C. check the date of the associated signature data file(s) on the IT database
D. check the date of the associated signature data file(s) in the policy manager
Answer: A
Symantec ST0-050 certification ST0-050 ST0-050
NO.4 How should the logical condition of an IF/THEN/ENDIF statement be reversed?
A. add an AND statement
B. enable the Reverse Logic Processing Engine for the requirement
C. use the Transform function of the extended scripting commands
D. toggle the NOT function on the IF portion of the statement
Answer: D
certification Symantec ST0-050 ST0-050 certification ST0-050 ST0-050 examen ST0-050
NO.5 Which custom requirement utility allows an administrator the ability to choose an informative icon to
display to the end user?
A. run a script
B. log message
C. show message dialog
D. run a program
Answer: C
Symantec examen certification ST0-050 ST0-050 examen
NO.6 Where does an administrator view compliance log files?
A. from the specific client in the Network Access Control log
B. from the Policy Manager console in the Monitors page
C. from the Policy Manager console in the Admin page
D. from the Enforcer debug logs
Answer: B
Symantec ST0-050 examen ST0-050 ST0-050
NO.7 Which two event details are included in a standard Host Integrity log file? (Choose two.)
A. client Host Integrity status
B. name and state of each requirement
C. error messages
D. checked parameter
E. http 200 ok
Answer: AC
Symantec certification ST0-050 certification ST0-050 certification ST0-050 certification ST0-050 certification ST0-050
NO.8 Which check can be performed using custom requirements to verify whether a product is running on a
client machine?
A. check that the service is running in the services snap-in
B. check that the service is running
C. check that the service has been stopped
D. check that the service has been registered
Answer: B
certification Symantec ST0-050 ST0-050 ST0-050 certification ST0-050
NO.9 A Helpdesk technician is examining the logs for a particular client when he notices something odd. A
Host Integrity event is listed for a client as failing a requirement, but that client machine is still able to
access the network even after having the check rerun several times. Why would the client's Host Integrity
status still pass?
A. The requirement logic is malfunctioning and the Helpdesk technician should notify the administrator to
contact the vendor.
B. It is likely to be a problem with the recording of the status. The log search must be rerun to update the
status.
C. The administrator has configured that requirement to allow the Host Integrity policy to pass even if it
fails.
D. The administrator has configured the OS to ignore Host Integrity even when it fails.
Answer: C
Symantec ST0-050 ST0-050 examen
NO.10 What is AVScript.js used for?
A. client status
B. to write to the system log
C. to start the status monitor
D. Host Integrity
Answer: D
Symantec ST0-050 examen ST0-050 certification ST0-050 ST0-050 certification ST0-050
NO.11 Where are Symantec Network Access Control client packages placed on the Symantec Endpoint
Protection Manager?
A. Client/Policies
B. Admin/Install Packages
C. Policies/Policy Components
D. Clients/Install Packages
Answer: B
certification Symantec certification ST0-050 ST0-050 ST0-050 examen ST0-050
NO.12 When choosing to run a script as an action in a custom requirement, which file format(s) can be used
to write the script?
A. only BAT or INI formats
B. only Pearl scripting
C. a custom file format with the .symc extension
D. any executable format recognized by Windows
Answer: D
Symantec certification ST0-050 certification ST0-050 ST0-050
NO.13 Which two default user accounts are created on an Enforcer? (Choose two.)
A. administrator
B. admin
C. root
D. user
E. guest
Answer: AC
Symantec ST0-050 ST0-050 examen certification ST0-050 ST0-050 examen
NO.14 How can the client be enabled to write the Host Integrity script to the disk?
A. set a condition in a custom requirement to write the script
B. set it in the Host Integrity policy under Advanced settings
C. enable debug logging through the registry on the endpoint
D. enable from the Clients tab under the Endpoint Machines Properties
Answer: C
Symantec ST0-050 ST0-050 examen ST0-050 ST0-050
NO.15 To verify that a Symantec Endpoint Protection Manager has Symantec Network Access Control
functionality, what change to the Policies tab would an administrator see?
A. Host Integrity
B. Host Checking
C. Host Compliance
D. Host Inspection
Answer: A
Symantec examen ST0-050 examen certification ST0-050
NO.16 What is the first step to troubleshoot a custom requirement in a Host Integrity policy?
A. run the Host Integrity check several times
B. carefully examine the logic structure of the conditions
C. examine the Security Compliance Summary reports
D. check the properties of the endpoint from the Clients page
Answer: B
Symantec examen ST0-050 certification ST0-050 ST0-050
NO.17 Which three types of data can be used with LAN Enforcers for the authentication sequence? (Choose
three.)
A. machine GUID
B. Policy ID
C. Host Integrity state
D. location awareness settings
E. user group
Answer: ACD
Symantec examen ST0-050 ST0-050 certification ST0-050 ST0-050
*
NO.18 What is the default context in which programs are run when using the patch requirement in a Host
Integrity policy?
A. in logged-in user context
B. in system context
C. in administrator user context
D. in domain-user context
Answer: B
Symantec ST0-050 ST0-050
NO.19 How many network interface(s) need to be configured for a Gateway Enforcer appliance?
A. 1
B. 2
C. 3
D. 4
Answer: B
certification Symantec ST0-050 certification ST0-050 ST0-050 examen certification ST0-050
NO.20 Which settings are specific to Antivirus and Antispyware predefined requirements?
A. application startup command
B. signature file check
C. execute an installation package
D. allow user to cancel remediation
Answer: B
Symantec examen ST0-050 ST0-050 ST0-050
Les produits de Pass4Test sont préparés pour le test Certification Symantec ST0-050, y compris les formations et les informations ciblées au test Symantec ST0-050. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
没有评论:
发表评论