Il y a nombreux façons à vous aider à réussir le test Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.
L'importance de la position de Certificat Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 par votre première fois.
Choisir le Pass4Test peut vous aider à réussir 100% le test Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Code d'Examen: JN0-102
Nom d'Examen: Juniper (Junos, Associate (JNCIA-Junos))
Questions et réponses: 319 Q&As
Code d'Examen: JN0-692
Nom d'Examen: Juniper (Service Provider Routing and Switching Support, Professional)
Questions et réponses: 171 Q&As
Code d'Examen: JN0-696
Nom d'Examen: Juniper (Security Support, Professional (JNCSP-SEC))
Questions et réponses: 36 Q&As
Code d'Examen: JN0-690
Nom d'Examen: Juniper (Junos Troubleshooting)
Questions et réponses: 70 Q&As
Code d'Examen: JN0-694
Nom d'Examen: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
Questions et réponses: 36 Q&As
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694 sans aucune doute.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-102 JN0-692 JN0-696 JN0-690 JN0-694. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
JN0-694 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-694.html
NO.1 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D
Juniper certification JN0-694 certification JN0-694
NO.2 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C
certification Juniper JN0-694 JN0-694 JN0-694 JN0-694 JN0-694
NO.3 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D
certification Juniper JN0-694 JN0-694 certification JN0-694 JN0-694
NO.4 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C
Juniper examen JN0-694 JN0-694 examen certification JN0-694 certification JN0-694
NO.5 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D
certification Juniper JN0-694 examen certification JN0-694
NO.6 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A
Juniper certification JN0-694 JN0-694 JN0-694 examen JN0-694
NO.7 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D
certification Juniper JN0-694 JN0-694 JN0-694
NO.8 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D
Juniper JN0-694 examen JN0-694 JN0-694 examen certification JN0-694 JN0-694 examen
